Operating instructions

23
English
Options
Hydro cleaning
The built-in water nozzles connected to the water supply are
flushed with fresh water after the whirl bath. Activating the
Hydro cleaning button (button 6, Fig. 1) after a bath flushes
the Hydro circuit through with cold water (empty bath first).
A LED in the button signal Hydro cleaning operation. Cleaning
takes approx. 5 minutes when the bath is completely empty.
Attention: Hydro cleaning needs an additional 1/2“
water connection (cold water) with subsequent check
valve.
Grips
The practical grabrails make getting in and out easier.
Bath rim thermostat
The bath rim thermostat option comprises the bath rim
thermostat, hand shower, Exafill bath inflow, drain and
overflow. The shut-off and diverter control the water supply via
hand shower or Exafill. The thermostat determines the exact
water temperature and is fitted with a check valve.
Check valves are located in the connection angle for cold and
warm water supply under the bath.
The shower hose is protected by a Secuflex hose.
Hydro cleaning
Grips