Range User Manual

Page 1-5

1-5

Cooking Products Service Manual

Original July, 1996 4321891

Once you are sure that the plug is polarized prop-

erly, perform the next step.

2. Connect the power cord plug on the gas range

to a 120-volt AC receptacle that is on a sepa-

rately fused line.

3-PRONG

GROUNDING PLUG

POWER SUPPLY

CORD

GROUNDING PRONG

3-PRONG

GROUNDING-

TYPE WALL

RECEPTACLE

WARNING

Personal Injury/Fire Hazard

Do not, under any circumstances, cut or re-

move the grounding prong from the range cord.

Failure to provide proper polarization may cause

shock and fire hazard.

ELECTRONIC IGNITION SYSTEM

When connecting an appliance that has an elec-

tronic ignition system to a 120-volt AC receptacle, it

is very important that the receptacle wiring is cor-

rectly polarized and properly grounded. If the plug is

not polarized properly, the ignitor module will not

operate correctly.

1. The 120-volt AC receptacle should use 3-

wires, and be polarized with two plug slots

and a round grounding pin. Proper wiring for

this type of receptacle is as follows:

a) The white wire is connected to the neutral

side of the plug.

b) The black wire is connected to the hot

(120-volt ac) side of the plug.

c) The green, or bare wire is connected to

the round grounding pin of the plug.

3-WIRE

AC RECEPTACLE

BLACK

GREEN

WHITE