Range User Manual

Page 3-23
3-23
Cooking Products Service Manual
Original July, 1996 4321891
© 1996 Whirlpool Corporation
REMOVING THE BAKE BURNER & IGNITOR
WARNING
5. Remove the heat shield from the oven .
REMOVE SCREWS
6. Remove the front and back mounting screws
from the bake burner.
BAKE BURNER
BAKE
IGNITOR
MOUNTING
SCREW
MOUNTING
SCREW
MOUNTING
SCREWS
HOLE IN
BOTTOM LINER
BACK OF
OVEN LINER
BRACKET
QUICK-DISCONNECT
PLUGS (LOCATED IN
STORAGE AREA)
7. Remove the storage drawer.
8. From inside the storage drawer area, discon-
nect the bake ignitor quick-disconnect plug
from the main harness.
9. Remove the bake burner and ignitor assem-
bly from the oven.
10. Reinstall the new bake burner and ignitor
assembly and reassemble the range.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the oven door (see page 1-20 for the
procedure).
3. Remove the racks from the oven.
4. Remove the two screws from the oven floor
and remove it.
REMOVE
SCREWS