Manual

Dryer Toe Panel Access
1. Remove the Transition Panel by removing the three (3) retaining
screws.
2. Using a putty knife, release the two (2) retaining clips and remove
the toe panel. (Fig. 20)
Fig. 20
Door Front Panel Access
1. Remove the transition panel and the Toe Panel.
2. Flip down the Control Panel. (Fig. 22)
3. Disconnect the Door Switch Wires.
4. Remove the Control Panel from the Front Pane! and set it on top of the unit. (Fig. 23)
Door
Switch
Wires
Screws
Fig. 22
10