Instructions for use
ENGLISH Instructions for use 2 Page 3
INDEX Chapter 1: INSTALLATION...................................................................................................4 1.1. INSTALLING SINGLE APPLIANCE.................................................................................................................4 1.2. INSTALLING TWO APPLIANCES....................................................................................................................4 1.3. ADJUST DOORS (IF AVAILABLE)......................................................
1. INSTALLATION 50mm 1.1. INSTALLING SINGLE APPLIANCE To guarantee adequate ventilation, leave a space on both sides and above the appliance. 50mm The distance between the rear of the appliance and the wall behind the appliance should be at least 50mm. A reduction of this space will increase the Energy consumption of product. 1.2.
2. FUNCTIONS 2.1. SMART DISPLAY* 2.3. BLACK OUT ALARM This function can be used to save energy. Please follow the instructions contained in the Quick Start Guide to activate/deactivate the function. Two seconds after activation of the Smart Display, the display goes off. To adjust the temperature or use other functions, it is necessary to activate the display by pressing any button. After about 15 seconds without performing any action, the display goes off again.
Attention: • Incompatibility with the “Fast Freeze” function To guarantee optimal performance, the “Shock Freeze” and “Fast Freeze” functions cannot be used at the same time. Therefore, if the “Fast Freeze” function has been already engaged, it has to be disengaged first to activate the “Shock Freeze” function (and vice-versa). 2.6. PARTY MODE* Use this function to chill drinks inside the freezer compartment. 30 minutes after selection (the time required to chill a 0.
To activate the Freeze Control choose the function from the menu, set to >ON< and press OK button to confirm the selection. To deactivate this function repeat the same procedure setting to >OFF<. The function works properly in a defined range of temperature: between -22°C and -24°C. 2.9.
2.12. ICE MATE* HOW TO TAKE ICE CUBES Make sure that the storage bin is in place under the ice tray. If not, slide into place. Twist one of levers firmly in the clockwise direction until the tray twists slightly. The ice cubes fall into the HOW TO MAKE ICE CUBES You can remove the ice cube tray by pulling it towards you. storage bin. WARNING: fill with potable water only (maximum level = 2/3 of the overall capacity). Repeat Step 2 for the other half of the tray, if necessary.
4. FOOD-STORAGE TIPS The freezer is the ideal storage location for store frozen food, make ice cubes and freeze fresh food in the freezer compartment. The maximum number of kilograms of fresh food that can be frozen within a 24-hour period is indicated on the rating plate (…kg/24h).
FOODS 4.2.
5. FUNCTIONAL SOUNDS Sounds coming from your appliances are normal since it has a number of fans and engines to regulate performances that switch on and off automatically. Some of the functional sounds can be reduced through • Leveling the appliance and installing it on an even surface. • Separating and avoiding contact between the appliance and furniture. • Checking if the internal components are correctly placed. • Checking if bottles and containers are not in contact with each other.
6. RECOMMENDATION IN CASE OF NO USE OF THE APPLIANCE In case longer absence its recommended to use up food and to disconnect the appliance to save energy. If ice crystals are still visible on the food, it may be frozen again, although flavour and aroma may be affected. 6.2. MOVING If food is found to be in a poor condition, it is best to throw it away. 6.1. ABSENCE / VACATION 1. Take out all internal parts. 2.
8. TROUBLESHOOTING GUIDE 8.1. BEFORE CONTACTING AFTER-SALES SERVICE… Performance problems often result from little things you can find and fix yourself without tools of any kind.
8.2. FAILURES In the event of operation alarms, they will also be displayed in the digits LEDs, (e.g. Failure1, Failure 2, etc...) call After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon lights up and the F letter on the digit display blinks according to failure code described below: Failure code Visualization Error 2 F letter blink on/off at 0,5 sec. Blinks ON 2 times then remain off for 5 seconds. Pattern repeats. x2 Error 3 F letter blink on/off at 0,5 sec.
Others: REVERSE DOOR SWING (VERSION_1) (1) 1. 6a. 6b. 2. 3. 4. 5.
6a. 6b. 7. 8. 9. 10.
REVERSE DOOR SWING (VERSION_2) (2) 1. 6a. 6b. 2. 3. 4. 5.
6a. 6b. 7. 8. 9. 10.
REMOVING/INSERT THE FREEZER INTERIOR 2 1 1 1 2 2 3 3 3 19
19515541600 GB 02/17 Whirlpool is a registered trademark of Whirlpool Corporation, USA 1 3 ~10 mm 4 2 clic k!