Specification

Custom Panel Dimensions and Installation
Custom panel should be constructed according to diagram below.
(Unit: )
inch/cm
1.18" (3.0 cm)
23.39" (59.4 cm)
9.84" (25.0 cm)
10" (25.4 cm)
22.36" (56.8 cm)
2.56" (6.5 cm)
6.79" (172.5 mm)
19.65" (49.9 cm)
26.78" (68.0 cm)
21.26" (54.0 cm)
1.50" (3.8 cm)
Hole deep 0.40" (0.10 cm)
12-φ 0.08" (0.20 cm)+
0.59" (1.5 cm)
Install the hook on the custom panel and insert the hook into the slot on the outer door of the dishwasher. After positioning the panel,
attach the panel to the outer door with screws and bolts.
Because Whirlpool Corporation policy includes a continuous commitment
to improve our products, we reserve the right to change materials and
specifications without notice.
Dimensions are for planning purposes only. For complete details, see
Installation Instructions packed with product. Specifications subject to
change without notice.
Page 2 of 2
W10703184-D-WH
5/16
Installation Clearances
Cabinet Cutout Dimensions
All surfaces must be
free from instrusions
4"
(10.2 cm)
24"
(61 cm)
min.
32
3
/
4
" to 34
1
/
2
"*
(83 cm to 88 cm)
6"
(15.2 cm)
24" (44.8 cm)
maximum
* Underside of countertop to floor
NOTES:
■ Cut holes in shaded area of cabinet walls or floor for plumbing
and electrical service.
■ ADA installation, 32
1
/
2
" (82.5 cm) beneath 34" (86.4 cm) high
countertops may be accomplished by adjusting the toekick
and leveling legs.