Manual and User Guide

Reverse Door Swing (optional)

If you want to reverse the direction of the door swing so that

the freezer and refrigerator doors open from the opposite side,

see the following instructions�

Note: The direction of the door opening can be changed� If this

operation is performed by a Service Provider, it is not covered by

the warranty� It is recommended to reverse the door swing with

two people�

Follow instruction in Installation Guide�

Gather the required tools and read all instructions before

removing doors�

Parts Supplied: Locate the Reversibility Kit (provided) in the

crisper drawer� The kit contains (4) hinge plugs, (1) Phillips screw,

(1) door plug, and (1) cap plug�

Tools Needed:

" hex key, #2 Phillips screwdriver, and a ﬂat-

blade screwdriver�

1. Before you begin, unplug refrigerator or disconnect power,

and remove food and door trays from the doors.

2. Remove the plugs from both sides. Do not discard the plugs.

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

A. Hinge Plug (4)

B. Phillips Screw (1)

C. Door Plug (1)

D. Cap Plug (1)