Setup and user guide

ManualsBrandsWhirlpool ManualsOtherUW8 F2C WHLSB

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting the

appliance to the power supply.

Connect the appliance to the power supply and turn the thermostat

knob to switch on the appliance.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available).

CONTROL PANEL

1. On/Stand By button

2. Temperature display

3. Fast freezer button

4. Stop Alarm button

5. Black out alarm

6. Eco Night function

7. 6

Sense Freeze control indicator

8. Freezer control indicator

4.5.6.

ON/STAND BY BUTTON

To put the product in Stand-by, press and hold for 3 seconds. All

the icons turn o except On/Standby indicator

. To reactivate the

appliance press once (briey) this button.

TEMPERATURE SETTING BUTTON

The appliance is normally factory-set for operation at the

recommended temperature of -18°C. The internal temperature can

be adjusted between -16°C and -24°C, proceeding as follows: Press to

change the set point (°C). The storage temperature can be changed

by -1°C with each pressure of the button: the value changes cyclically

between -16°C and -24°C.

FAST FREEZER BUTTON

To activate/deactivate the Fast Freeze function simply press Fast Freeze

button (see the Instructions for Use). The Fast Freeze function switches

o automatically after 50 hours.

STOP ALARM BUTTON

Press in case of alarm.

BLACK OUT ALARM

Long Black-out Alarm indicator (see the Instructions for Use).

ECO NIGHT FUNCTION (NIGHT TIME RATE)

Press to activate/deactivate the Eco Night function. The Eco Night

function enables appliance energy consumption to be concentrated in

the reduced rate hours, generally at night (see the Instructions for Use).

SENSE FREEZE CONTROL INDICATOR

Sense Freeze Control is an advanced technology that reduces

freeze burns and food preserves its original quality and color.

FREEZER CONTROL BUTTON

Freeze Control is an advanced technology that reduces temperature

uctuations in the whole freezer compartment to minimum. To

activate/deactivate the Freeze Control function press for 3 seconds

the FREEZE CONTROL button. If the function is engaged and the user

modify the freezer temperature out of the working range, the function

is automatically switched o. In case of Fast freezing is engaged, the

function “Freeze control” is inhibited until the Fast Freezing function

switched o (see the Instructions for Use).

FREEZER COMPARTMENT AND FOOD STORAGE

Legend

FREEZER ZONE

All food items

Summary of content (2 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT In order to receive a more complete assistance, please register your product on www‌.‌whirlpool‌.‌eu/‌register Before using the appliance carefully read the Safety Instruction. PRODUCT DESCRIPTION FIRST TIME USE Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply and turn the thermostat knob to switch on the appliance.
PAGE 2
TROUBLESHOOTING What to do if... Possible reasons Solutions The appliance doesn’t work. There may be an appliance power supply problem. Make sure: • there is not a power failure; • the plug is properly inserted in the power socket and the doublepole switch (if present) is in the correct position (on); • the household electrical system protection devices function; • the power cable is not broken. The inside light does not work. It may be necessary to replace the light bulb.