Brugsanvisninger
DANSK Brugsanvisninger 2 Side 3
INDHOLDSFORTEGNELSE Kapitel 1: INSTALLATION....................................................................................................4 1.1. OPSTILLING AF ENKELT APPARAT...............................................................................................................4 1.2. OPSTILLING AF TO APPARATER...................................................................................................................4 1.3. JUSTER DØRE (HVIS TILGÆNGELIG).....................................
1. INSTALLATION 50mm 1.1. OPSTILLING AF ENKELT APPARAT For at sikre tilstrækkelig ventilation skal der efterlades mellemrum på begge sider og oven over apparatet. 50mm Der skal være en afstand på mindst 50 cm mellem apparatets bagside og væggen. En reduktion af denne afstand vil øge produktets energiforbrug. 1.2. OPSTILLING AF TO APPARATER Hvis fryseren 1 og køleskabet 2 opstilles sammen, skal fryseren placeres til venstre og køleskabet til højre (som vist på tegningen).
2. FUNKTIONER 2.4. ALARMEN BLACK OUT 2.1. SMART DISPLAY* Denne funktion kan bruges til at spare energi. Følg anvisningerne i oversigtsvejledningen for at aktivere/inaktivere funktionen. To sekunder efter aktiveringen af Smart Display slukker displayet. For at justere temperaturen eller bruge andre funktioner skal displayet aktiveres ved at trykke på en knap. Displayet slukkes automatisk igen, hvis der ikke foretages yderligere handlinger i ca. 15 sekunder.
Bemærk: • Kan ikke anvendes sammen med funktionen “Lynindfrysning” For at garantere optimal ydelse kan funktionerne “Chokfrysning” og “Lynindfrysning” ikke være aktive sammen på samme tid. Hvis funktionen “Lynindfrysning” allerede er aktiveret, skal den derfor inaktiveres, før funktionen “Chokfrysning” kan aktiveres (og vice versa). 2.7. PARTY MODE* Denne funktion gør det muligt at afkøle drikkevarer i fryseafdelingen.
2.10. ECO NIGHT-FUNKTION Vælg funktionen fra menuen for at aktivere Frysekontrol, indstil til >ON< og tryk på knappen OK for at bekræfte valget. Gentag den samme procedure indstilling på >OFF< for at inaktivere funktionen. Funktionen virker korrekt inden for et defineret temperaturinterval: mellem -22 °C og -24 °C.
2.13. ICE MATE* SÅDAN TAGES ISTERNINGER UD Sørg for, at beholderen er skubbet helt ind under isterningbakken. Hvis ikke, skub den ind. Drej et af håndtagene i urets retning, indtil bakken drejer en smule. Isterningerne falder ned i isbeholderen. SÅDAN LAVES ISTERNINGER Du kan tage isterningbakkerne ud ved at trække i dem. ADVARSEL: fyld kun med drikkevand (maksimalt niveau = 2/3 af den samlede kapacitet). Gentag punkt 2 for den anden halvdel af bakken, hvis det er nødvendigt.
4. OPBEVARINGSTIPS Fisk “Fede” fisk (laks, sild, makrel) “Fedtfattige” fisk (torsk, tunge) Fryseren er ideel til opbevaring af frostvarer, til indfrysning af friske madvarer samt til fremstilling af isterninger. Mængden af friske madvarer, der kan indfryses på 24 timer, er angivet på typepladen (…kg/24t).
MADVARER 4.2.
5. FUNKTIONELLE LYDE Det er normalt, at der høres forskellige lyde fra dine apparater, da de har en række ventilatorer og motorer til at regulere funktioner, der automatisk tændes og slukkes. Nogle af de funktionelle lyde kan reduceres ved at • Sætte apparatet i vater og opstille det på en jævn overflade • Undgå kontakt mellem apparatet og andre køkkenelementer. • Kontrollere, at de interne dele er placeret korrekt. • Sørge for, at flasker og beholdere ikke berører hinanden.
6. ANBEFALING NÅR APPARATET IKKE ER I BRUG I tilfælde af længere fravær anbefales det at bruge fødevarer og frakoble apparatet for at spare strøm. Hvis der stadig er iskrystaller på madvarerne, er det muligt at genindfryse dem uden risiko. Madvarerne vil imidlertid sandsynligvis skifte farve og smag. 6.2. FLYTNING Hvis madvarerne derimod er i dårlig tilstand, skal de kasseres. 6.1. VED LÆNGEREVARENDE FRAVÆR/FERIE 1. Fjern alle indvendige dele. 2.
8. FEJLFINDINGSOVERSIGT 8.1. FØR SERVICEAFDELINGEN KONTAKTES... Ydelsesproblemer skyldes ofte små ting, som du selv kan finde og rette uden værktøjer af nogen art. PROBLEM LØSNING • • Er netledningen sat i en stikkontakt med korrekt spænding? Er der gået en sikring? Kanterne på køle-/fryseskabets kabinet, der kommer i kontakt med dørpakningen, er varme ved berøring: • Dette er normalt i varmt vejr og når kompressoren kører.
8.2. FEJL I tilfælde af driftsalarmer vises de også med kontrollamperne (f.eks. Fejl 1, Fejl 2, osv...). Kontakt serviceafdelingen, og angiv alarmkoden. Lydsignalet høres, alarmikonet tænder og bogstavet F blinker i henhold til den fejlkode, der beskrives herunder: Fejlkode Visning Fejl 2 Bogstavet F blinker med 0,5 sek. interval. Blinker ON 2 gange og forbliver derefter slukket i 5 sekunder. Mønsteret gentager sig. x2 Fejl 3 Bogstavet F blinker med 0,5 sek. interval.
(1) 1. 6a. 6b. 2. 3. 4. 5.
6a. 6b. 7. 8. 9. 10.
(2) 1. 6a. 6b. 2. 3. 4. 5.
6a. 6b. 7. 8. 9. 10.
2 1 1 1 2 2 3 3 3 19
19514700000 DA 06/16 Copyright Whirlpool Europe s.r.l. 2014. Alle rettigheder forbeholdes - http://www.whirlpool.