Instructions for use
ENGLISH Instructions for use 3 Page 4
IMPORTANT SAFETY INSTRUCTIONS • WARNING: to avoid a hazard due to instability, positioning or fixing of the appliance must be done in accordance with the manufacturer instructions. • WARNING: keep the appliance ventilation openings clear of obstruction. • WARNING: do not damage the appliance refrigerant circuit pipes. • WARNING: Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process.
• • • • the appliance from the power supply by unplugging it if plug is accessible, or by means of an accessible multi-pole switch installed upstream of the socket in conformity with national safety standards. Plug the appliance into a grounding socket: the appliance must be correctly connected to an approved earthing system. Do not use single/multi adapters or extension cords. During installation, make sure the appliance does not damage the power cable. Do not pull the appliance power cable.
BEFORE USING THE APPLIANCE To ensure best use of your appliance, carefully read the operating instructions which contain a description of the product and useful advice. Keep these instructions for future reference. 1. After unpacking the appliance, make sure it is not damaged and that the door closes properly. Any damage must be reported to the dealer within 24 hours of delivery of the appliance. 2.
ELECTRICAL CONNECTION FOR GREAT BRITAIN AND IRELAND ONLY Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover (A) and fuse (B). 2. Fit replacement 13A fuse into fuse cover. 3. Refit both into plug.
19513873600 GB 03/17