Setup and user guide

ManualsBrandsWhirlpool ManualsOtherUW8 F2D XBI N

ALARMS TABLE

ALARMS TYPE Signal Cause Cure

Door open alarm

The acoustical alarm is activated and the Alarm Indicator

blinks.

The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.

Temperature alarm

The Temperature display blinks (°C) and the Alarm Indicator

remains on.

The inside temperature is not adequate.

Press the Stop Alarm button

; the acoustical alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator

remains on until a temperature < -10°C is reached.

Party Mode Alarm

The Party Mode Indicator

blinks and the acoustical alarm is activated.

30 min. elapsed since Party Mode function has been activated. It is time to take out the

bottle from the freezer ( see Instructions for Use for more details).

Press the Stop Alarm button

and remove the bottle from the freezer.

Long Black-Out alarm

The Black Out Alarm icon

remains on, the Alarm indicator blinks and the

Temperature display (°C) blinks, showing the maximum temperature reached during

blackout.

Prolonged power failure, able to cause the inside temperature to increase to 0°C.

Press the Stop Alarm button

; the acoustical alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator

remains on until a temperature < -10°C is reached.

Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.

Read the Instructions for Use carefully before

using the appliance.

SMART DISPLAY

This optional function can be used to save energy. To activate the Smart

Display, press the buttons

and together for 3 seconds until an

audible signal sounds.

To deactivate this function repeat the same procedure.

Remember that this function does not disconnect the appliance from the

power supply, but only reduce the power consumed by external display

(see the Instructions for Use).

19515231501

QUICK START GUIDE

Printed in Italy 03/17 - Whirlpool

TEMPERATURE DISPLAY

ON/STANDBY indicator /button

To put the product in Stand-by, press and hold for 3 seconds. All the icons

turn off except On/Standby indicator

. To reactivate the appliance press

once (briefly) this button.

SENSE FREEZE COTROL

6th Sense Freeze Control is an advanced technology that reduces freeze

burns and food preserves its original quality and color.

ECO NIGHT FUNCTION (NIGHT TIME RATE) / PARTY MODE button

Eco Night function

Press to activate/deactivate the Eco Night function. The Eco Night function enables

appliance energy consumption to be concentrated in the reduced rate hours, generally

at night (see the Instructions for Use)

Party Mode

To activate / deactivate the Party Mode function, press the Stop Alarm button for 3

seconds. In case of Party Mode alarm to deactivated press the Stop Alarm button.

TEMPERATURE SETTING button

The appliance is normally factory-set for operation at the recommended

temperature of -18°C. The internal temperature can be adjusted between

-16°C and -24°C, proceeding as follows:

• Press to change the set point (°C). The storage temperature can be

changed by -1°C with each pressure of the button: the value changes

cyclically between -16°C and -24°C.

FAST FREEZE indicator (see the Instructions for Use).

PARTY MODE indicator (see the Instructions for Use).

BLACK OUT ALARM

Long Black-out Alarm indicator. (see the Instructions for Use)

1. Control panel

2. Light (LED system)

3. Ice packs*

4. Ice Mate* or Ice tray*

5. Drawer divider*

6. Bottle rack*

7. Glass shelves

8. Rating plate with commercial name

9. Door reversibility kit

10. Area for freezing fresh food or to store

frozenfood

11. Area for storing frozen foods

12. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts

the operation automatically. After starting the

appliance, wait at least 4-6 hours before placing food

into the appliance. When the appliance is connected

to the power supply, the display lights up and all

the icons appear on the display for approximately 1

second.

The default (factory) values of the freezer

compartment settings light-up.

HOW TO REVERSE DOOR SWING

- see enclosed Instructions for Use (Version_1)

Is recommended to reverse door swing by two

persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images

mayvary from model to model.

STOP ALARM button

Press in case of alarm (see the below Alarm Table).

FREEZE CONTROL / FAST FREEZE button

Freeze Control

Freeze Control is an advanced technology that reduces temperature fluctuations in the

whole freezer compartment to minimum.

To activate/deactivate the Freeze Control function simply press FREEZE CONTROL button.

If the function is engaged and the user modify the freezer temperature out of the working

range, the function is automatically switched off.

In case of Fast freezing is engaged, the function “Freeze control” is inhibited until the Fast

Freezing function switched off.(see the Instructions for Use)

Fast Freeze

Press for 3 seconds to activate/deactivate the Fast Freeze function (see the Instructions

for Use).

The Fast Freeze function switches off automatically after 50 hours.

DK FI NOGB NL SVITFR DE