Use and Care Guide

6
Countertop Cutout Dimensions
IMPORTANT: Countertops with a bull-nosed front edge are not recommended for these installations.
Some models require a countertop deeper than 25" (63.5 cm); see the following “Countertop Cutout Dimensions Chart.”
To avoid mistakes, it is recommended that the cooktop and vent cutouts be drawn on the countertop before making any cutouts.
See the Installation Instructions that came with your cooktop for complete cutout dimensions, location dimensions and installation
details.
Countertop Cutout Dimensions Chart
A. Downdraft vent
B. Cooktop
C. Measurement of cooktop rear overhang
D. D = Measurement of cooktop rear overhang (C)
+ 1
¹³⁄₁₆ " [46.2 mm] (E)
E. 1
¹³⁄₁₆ " (46.2 mm)
F. ½" (12.7 mm) minimum
G. ¼" (6.4 mm) minimum
H. Countertop and backsplash
I. ½" (12.7 mm) minimum
A. ½" (12.7 mm) minimum to
backsplash or rear wall
B.
³⁄₄ " (19.1 mm) maximum
backsplash depth
C. 27
¹⁄₂ " (69.9 cm) on 30" (76.2 cm) models
33
¹⁄₂ " (85.9 cm) on 36" (91.4 cm) models
D. D = Measurement of cooktop rear overhang
+ 1
¹³⁄₁₆ " (46.2 mm)
A
B
C
E
H
D
I
G
F
A
B
C
D