YOUR ELECTRONIC WASHING MACHINE GB This washing machine is equipped with all-electronic control, which opens up a host of possibilities for you. Amongst others, these include: precise determination of load, imbalance detection and correction system, fast programme changing, accurate programme sequence indicator, start delay, soaking, safety feature “intelligent (anti-flood) Water Stop system”.
LAUNDRY CARE LABELS WASH IRON Resistant cotton Hot iron Synthetics Use medium hot iron Delicates Do not use hot iron The figures correspond to the maximum permitted washing temperatures.
QUICK REFERENCE GUIDE GB BEFORE USING THE APPLIANCE FOR THE FIRST TIME: • FOLLOW THE “INSTALLATION INSTRUCTIONS”. • REMOVE THE TRANSIT BOLTS BEFORE USING THE APPLIANCE. • First wash cycle without laundry: Turn on the tap. Close the appliance door. Pour a small amount of detergent (about 30 ml) into the detergent dispenser . Select a short program (see programme chart). The “Power On” indication shows that the machine is switched on. The pilot lamp of the “Start/Pause” button flashes.
GB CONTENTS YOUR ELECTRONIC WASHING MACHINE PAGE 21 LAUNDRY CARE LABELS PAGE 22 APPLIANCE AND ACCESSORIES PAGE 25 CHILD SAFETY PAGE 25 PROTECTING THE ENVIRONMENT PAGE 26 SAFETY INSTRUCTIONS PAGE 26 TRANSPORT / HANDLING PAGE 26 PREPARING THE WASH PAGE 27 DETERGENT AND ADDITIVES PAGE 28 DYEING AND BLEACHING PAGE 29 PROGRAMME SELECTION / PROGRAMME START PAGE 29 START DELAY PAGE 29 DOOR LOCK / PROGRAMME END PAGE 30 CHANGING / INTERRUPTING / CLEARING PROGRAMME PAGE 30
APPLIANCE AND ACCESSORIES Worktop Control panel Detergent dispenser After-Sales Service sticker (on the back side of the door) Door Door handle - To open the door press the button on the inside of the handle and pull - Close the door by pushing it firmly (the lock will click into place) 7. Child safety (inside door) 8. Filter (behind cover) 9. Plinth 10. Residual water drain (behind the plinth) 1. 2. 3. 4. 5. 6.
PROTECTING THE ENVIRONMENT PACKING MAXIMISE THE LOAD SIZE • • • The packing material is 100 % recyclable (marked with the recycling symbol ). Adhere to local regulations when disposing of packaging material. The packaging material (plastic bags, polystyrene parts, etc.) is potentially dangerous and must be kept out of reach of children. PRODUCT • • The appliance is made from recyclable materials and must be scrapped in accordance with local waste disposal regulations.
PREPARING THE WASH 1. Sort the laundry according to… • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwashed items. • Colour Separate whites and coloureds. Wash new coloured items separately. • Size Wash items of different sizes in the same load to improve washing efficiency and distribute the load more evenly inside the drum. • Fabric delicacy Wash delicate articles separately: use a special programme for Pure New Wool , curtains and other delicates.
DETERGENT AND ADDITIVES CHOOSING THE RIGHT DETERGENT • The type of detergent depends on: • type of fabric (cottons, easy care/synthetics, delicate items, wool). Note: use only specific detergents for wool. • colour; • washing temperature; • degree and type of soiling. DOSAGE Do not use solvents (turpentine, benzine, etc.). Do not machine wash fabrics that have been treated with solvents or flammable liquids.
DETERGENT AND ADDITIVES Notes: • You can use liquid detergent in the “Prewash” phase for programmes with this option. In this case use only powder detergents for the main wash. • If the “Start Delay” option is used, put liquid detergent into the drum with a detergent ball. • When using concentrated fabric softeners, add water in the detergent dispenser up to “MAX” level mark.
DOOR LOCK / PROGRAMME END DOOR LOCK PROGRAMME END The door locks automatically after the programme starts until the end of the programme. The “Door free” indicator goes out. Exception: In the programmes Cotton and Synthetics and during the prewash for these programmes, the door can be opened in order to add further items during the first 15 minutes after the start of the programme. This is not possible if “Rapid Wash” is selected.
REMOVING THE FILTER / DRAINING RESIDUAL WATER REMOVING THE FILTER 1. Switch off the appliance (set the programme selector to and unplug it). 2. Remove the coloured insert from the detergent dispenser and use it to open the filter cover. 3. Place a bowl beneath the filter. 4. Turn the filter slowly anti-clockwise until the grip is vertical; do not extract filter as yet. 5. Wait until all the water has drained out. 6. Now unscrew the filter completely and extract it. 7.
CARE AND MAINTENANCE APPLIANCE EXTERIOR AND CONTROL PANEL • • 2 1 2 Clean using normal household cleaner (do not use abrasive products). Dry with a soft cloth. DETERGENT DISPENSER 1. Disengage the detergent dispenser by pressing the release lever in the prewash compartment and extract it. 2. Remove the inserts (the siphon from the softener compartment and the insert for liquid detergents). 3. Wash all the parts under running water. 4. Replace the parts and refit the detergent dispenser.
TROUBLESHOOTING GUIDE This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. Often, however, the faults detected are small enough to be solved in a matter of minutes. For example: The appliance will not start, no lamp lights up. Check whether: • the appliance is plugged in; • the wall socket is functioning correctly (use a table lamp or similar). The appliance will not start, but the “Start/Pause” lamp is flashing.
TROUBLESHOOTING GUIDE What should I do when the automatic safety system detects a malfunction? The programme is interrupted, an audible tone sound and various indicators (if available) point to the source of the fault.
AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service. Specify: • The nature of the problem. • The exact model of the appliance. • The service code (number after the word SERVICE). The After-Sales Service sticker is on the inside of the door. • • Your full address.
INSTALLATION INSTRUCTIONS INSTALLATION • • • Install the appliance on a solid and level floor surface, preferably in a corner of the room. Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (use a spirit level). If the floor is uneven, adjust the levelling feet as required (do not insert pieces of wood etc. under the feet): 1. Slacken the locknut using the spanner supplied. 2. Adjust the height of the foot, turning it by hand. 3.
INSTALLATION INSTRUCTIONS WATER SUPPLY • • • Water supply: cold water only Tap: 3/4” threaded hose connection Pressure: 100-1000 kPa (1-10 bar). WATER INLET HOSE 1. The mesh filter supplied with the appliance must be inserted in the connection between the inlet hose and the tap. 2. Carefully screw the hose connection onto the tap preferably by hand. Make sure there are no kinks in the hose. 3. Check water-tightness of tap and appliance connections by turning the tap completely on.
INSTALLATION INSTRUCTIONS ELECTRICAL CONNECTIONS • • • • • • • 38 Electrical connections must be made in accordance with local regulations. The appliance must be connected to the mains exclusively by means of a socket with an earth connection in accordance with established regulations. The appliance must be earthed by law. The manufacturer declines all liability for damage to property or injury to persons or animals deriving either directly or indirectly from failure to observe the above directions.