Setup and user guide

AR
1. Control panel
Refrigerator Compartment
2. Refrigerator compartment light (LED system)
3. Fan
4. Shelves / Shelf area
5. Multi-flow cold air system
6. Bottle rack*
7. Cooler compartment (best for meat and fish) *
8. Rating plate with commercial name
9. Fruits and vegetables crisper
10. Crisper divider*
11. Doors reversibility kit
12. Egg tray
13. Bottle holder
14. Water tank
15. Door trays
16. Door seals
Freezer Compartment
16. Door seals
17. Upper zone with flap (freezing zone or storing
frozen food)
18. Twist Ice Maker
19. Shelves
20. Storage baskets for frozen food items
21. Freezer door trays for frozen products with a
short storage time (
storage compartment)
Anti-bacterial protection:
- Antibacterial filter* in the fan (3)
- Antibacterial additives* in the material of Crisper
(9)
- Door seals are made of material able to inhibit
bacterial growth (15)
* Available on selected models
HOW TO CHANGE DOOR SWING
- see enclosed instructions (Model Version_1)
Specifications, technical data and images may
vary from model
Read the Instructions for Use carefully before
using the appliance.
QUICK START GUIDE
AE
Printed in Italy 11/13 - Whirlpool
®
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.whirlpool.eu
5019 320 00121
ALARMS TABLE Signal Cause Cure
Door open alarm
The acoustical alarm is activated and the
alarm icon
blinks
The door has remained open for more
than 2 minutes
Close the door
Temperature alarm
The acoustical alarm is activated, 5
Freezer Temperature LEDs blinks and
thered light
remains on
The inside temperature is not
adequate
Press the button ; the acoustical
alarm stops, 5 Freezer Temparature
LEDs blinks and the red light
remains on until a temperature < -10°C
is reached.
Long black-out alarm
The acoustical alarm is activated, the light
remains on and the light blinks.
Prolonged power failure, able to cause the
inside temperature to increase to 0°C
Press the button
; the acoustical
alarm stops.
Malfunction
3 central LEDs in the Fridge Temperature
LEDs blinks on the display
Product malfunction Contact the After-sales Service
SMART DISPLAY
This optional function can be used to save energy. To activate the Smart Display, press
Fridge °C
and Freezer °C buttons at the same time for 3 seconds until an audible signal sounds. To deactivate
this function repeat the same procedure. Remember that this function does not disconnect the
appliance from the power supply, but only reduce the power consumed by external display (see the
Instructions for Use).
FAN
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food. By default, the fan is switched on. The fan
automatically stops working when the fridge door is open (see
the Instructions for Use)
6th SENSE FRESH CONTROL
This function automatically works to ensure the
optimal conditions to preserve the stored food. To
activate the 6th SENSE FRESH CONTROL, press
Eco Night and Freezer °C buttons at the same
time for 3 seconds until an audible signal sounds. To
deactivate this function repeat the same procedure.
ON/STAND-BY
To put the product in Stand-by, press and hold
for 3 seconds. All the icons turn off except
On/Standby indicator . Press again to
reactivate the appliance. (see the Instructions
for Use)
ECO NIGHT FUNCTION (NIGHT TIME RATE)
Press to activate/deactivate the Eco Night function. The Eco Night function
enables appliance energy consumption to be concentrated in the reduced rate
hours, generally at night (see the Instructions for Use)
FRIDGE TEMPERATURE LEDs
To adjust the Fridge Temperature, press the
Fridge °C button. The Fridge Temperature
can be adjusted between +2°C and + 8°C, as
shown by the Fridge Temperature LEDs.
FRIDGE TEMPERATURE / FAST COOL button
Using Fast Cool function it is possible to
increase the cooling in the refrigerator
compartment. The use of this function
is recommended when placing a very
high quantity of food in the refrigerator
compartment. Press & hold for 3 sec. the
Fridge °C button to activate Fast Cool function.
When activated, the Fast Cool indication will be
displayed by the Fridge Temperature LEDs as
shown in the beside sequence. The function is
automatically disabled after 6 hours, or can be
manually disabled by pressing Fridge °C button.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
freezer and refrigerator compartments settings light-up.
BLACK OUT ALARM
Long Black-out Alarm
indicator. (see the Instructions
for Use)
STOP button / ALARM icon Press in case of alarm (see the
below Alarms Table). To lock/unlock the keys of the Control
Panel, press the Stop Alarm button for 3 seconds: the Key
Lock Indicator will be displayed for a short time and an
acoustical signal will be played.
FREEZER TEMPERATURE LEDs
To adjust the Freezer Temperature, press the
Freezer °C button. The Freezer
Temperature can be adjusted between -16°C
and -24°C, as shown by the Freezer
Temperature LEDs.
FREEZER TEMPERATURE / FAST FREEZE button
The use of this function is recommended when
placing a very high quantity of food to be frozen
in the freezer compartment. 24 hours before
freezing fresh food, press & hold for 3 sec. the
Freezer button to activate the Fast Freeze
function. When activated, the Fast Freeze
indication will be displayed by the Freezer
Temperature LEDs as shown in beside
sequence. After 24 hours place the food to be
frozen in the upper basket of freezer
compartment. The function is automatically
disabled after 48 hours, or can be manually disabled by
pressing
Freezer °C button.
KEY LOCK indicator
(see the Instructions for Use)
a - ON/OFF button
b - cover of Fan
ON - OFF
b
a