Instruction for Use

The temperature setting works for both the refrigerator
and the freezer compartments at the same time.
At first plug-in the appliance is set at medium temperature
(factory setting).
Following table shows temperature setpoints:
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Legend: Led ON Led OFF
FUNCTIONS
Fast Cool
The use of the Fast Cooling function is
recommended:
- to increase the cooling speed of the refrigerator
compartment when placing a very high quantity of
food within it,
- to maximize the freezing capacity of the freezer
compartment: for this reason you should activate
the Fast Cooling function before placing fresh food
to be frozen in the freezer compartment.
Press "Fast Cool button" to activate/deactivate Fast
Cool function.
When activated, the Fast Cool icon lights-up
The function is automatically deactivated after 6
hours.
"6th Sense Fresh Control"
This function automatically works to ensure the
optimum storage conditions (regarding temperature
and humidity) to be quickly reached inside the
appliance. The fan must also be switched on for it to
works properly. The "6th Sense Fresh Control" is
activated by default.
To manually deactivate the function, press the
"Temperature & Fast Cool" buttons for 3sec: the "6th
Sense Fresh Control" icon turns off as confirmation
that the feature has been deactivated. The function
can be reactivated by repeating the same procedure.
In the event of an interruption in electricity, the "6th
Sense Fresh Control" status resets to default i.e.
active.
CLEANING
Important: Before carrying out any cleaning or
maintenance operation, unplug the appliance or
disconnect it from the power supply.
Regularly clean the appliance using a cloth and a solution
of warm water, with some soft detergent suitable for
cleaning the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water,
regularly clean the inside of the draining hole on the back
of the refrigerator near the fruit and vegetable drawer,
using the tool provided .
NO FROST FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items don't stick to the walls, labeling stays legible
and storage space remains neat and clear.
NO FROST REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The defrost water is automatically run into a
drain hole and will be collected in a container placed in
the back of the product, where it will evaporate.
LED LIGHT SYSTEM
The light system inside the refrigerator
compartment uses LEDs light, allowing
a better lightning as well as a very low
energy consumption.
If the LED light system does not work,
please contact the Service to replace it.
Important:
The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for
more then 10 minutes the light will be automatically
switched off.
MALFUNCTION AND ALARM INDICATIONS:
Operation Alarms
In the event of operation alarms, they will be displayed in
the Temperature LEDs, (e.g. Failure1, Failure 2, etc...) call
After-sales Service and specify the alarm code.
The 3 central LEDs in the Temperature LEDs blinks
according to failure code described below:
Legend: Led off Led flashing
PRODUCT SHEET
GB
CAUKRROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
Failure
code
Visualization
Error 2
RC Set points blink on/off at 0,5 sec.
Blinks ON 2 times then remain off
for 5 seconds. Pattern repeats.
x2
Error 3
RC Set points blink on/off at 0,5 sec.
Blinks ON 3 times then remain off
for 5 seconds. Pattern repeats.
x3
Error 6
RC Set points blink on/off at 0,5 sec.
Blinks ON 6 times then remain off
for 5 seconds. Pattern repeats.
x6