Use and Care Guide

5
36" (91.4 cm) Model WCE97US6H Touch-Activated Electronic Control Model shown
COOKTOP CONTROLS – ELECTRONIC TOUCH
CONTROLS
Cooktop Controls
Wi-Fi Connectivity
■
Connect to Network: Download the Whirlpool
®
app from the
app store on your mobile phone. See the Connectivity Setup
sheet for more detailed instructions.
■ SAID Code: The SAID code is used to sync a smart device
with your appliance.
The SAID code plate is located on the metal cabinet
underneath the cooktop. See the following illustration.
■ MAC Address: MAC Address is displayed for the Wi-Fi
module.
■ Wi-Fi Radio: Turn Wi-Fi on or off.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
1. Touch ON/OFF for the desired element.
2. Touch the UP or DOWN keypad to select the power level.
Hold
3 sec
Wifi Tim er
B
A
H
G
F
E
C
D
WA R M Z O N E
D U A L E L E ME NT
T R I P L E E LE ME N T
ON
OFF
ON
OFF
ZONE
SIZE
ZONE
SIZE
ON
OFF
OK
ON
OFF
WARM
ZONE
A. Ceramic glass cooktop
B. 6" (15.2 cm) single element
C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm)
triple element
D. Right rear warming zone
E. 6" (15.2 cm) single element
F. Control panel
G. 10"/6" (25.4 cm/15.2 cm)
dual element
H. Model and serial number plate (located
underneath cooktop on metal cabinet)
AB
A. Model/serial number plate
B. SAID code for Wi-Fi connection
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.