Installation Guide

6
Cutout Dimensions - Top View
NOTES:
After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the
cooktop base.
To avoid this modification, use a base cabinet with sidewalls wider than the cutout.
If cabinet has a drawe
r, a 4" (10.2 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base
cabinet is
required. The drawer depth may need to be shortened to avoid interfering with the regulator.
IMPOR
TANT: If a built-in wall oven is to be installed below this cooktop, the gr
ounded outlet and gas supply piping must be located in
an adjacent cabinet
.
This cooktop and its gas and electrical supply sources must be installed before the undercounter built-in wall oven is installed.
Back Wall
Side Wall Side Wall
Countertop Front Edge
H
I
B
A
C
D
E
Cutout (Product Opening) Dimensions
Models
BA
MinRecommended MaxMin Recommended Max
ICS500DS and ICS655DS 28
¹⁄₂ " (72.4 cm) 28 ⁷⁄₈ " (73.4 cm) 29 ⁵⁄₁₆ " (74.3 cm) 19" (48.3 cm)19 ¹⁄₂ " (49.5 cm) 20" (50.8 cm)
Side Walls (Combustible Surfaces)
I dna HsledoM
ICS655DS
H and I added together must be at least 48" (122.0 cm),
with each side individually being at least 12" (30.5 cm).
ICS500DS Both have to be 8" (20.3 cm) or more.
Back Wall and Countertop Front Dimensions
EDCsledoM
ICS500 DS and ICS655DS 25" (63.5 cm)2
⁷⁄₈ " (7.3 cm)3 ¹⁄₈ " (7.9 cm)