Use and Care Manual

15
4. If the burner grates are installed, remove them.
5. If they are installed, remove the burner grates.
Use the following chart to match the correct gas orifice spud
with the burner location and model being converted.
Natural Gas Orifice Spud Chart
Model
Family
Burner
Burner
Rating
(BTU)
Color
Stamp
(A)
Size
(mm)
WCG-
K3030P,
WCG-
K5030P
Right
Front
9100 BLUE 132 1.32
Left
Front
12000 RED 150 1.5
Right
Rear
18000 BLACK 188 1.88
Left
Rear
5000 GREEN 96 0.96
Center N/A N/A N/A N/A
WCG-
K5036P,
WCG-
K7030P,
WCG-
K7530P,
WCG-
K7536P
Right
Front
9100 BLUE 132 1.32
Left
Front
12000 RED 150 1.5
Right
Rear
9100 BLUE 132
1.32
Left
Rear
5000
GREEN 96
0.96
Center 18000 BLACK 188 1.88
WCG-
K7036P
Right
Front
11000 ORANGE 143 1.43
Left
Front
12000 RED 150 1.5
Right
Rear
11000 ORANGE 143 1.43
Left
Rear
5000 GREEN 96 0.96
Center 18000 BLACK 188 1.88
A
A. Stamp
Burner locations
A
B
D
C
E
A. Left front
B. Left rear
C. Center
D. Right rear
E. Right front
6. Remove all burner caps and burner bases (see the Quick
Start Guide for burner reference).
B
D
C
A
Standard Flame
A.
Igniter electrode
B. Gas tube opening
C. Burner cap
D. Burner base
7. To Convert Standard Burner:
� Use 7.0 mm wrench to loosen and remove the orifice spud
(A).
� Set gas orifice spud aside.
� Replace with correct Natural gas orifice spud. See Natural
gas orifice spud chart.
A
B C
A. Orifice spud
B. Orifice spud holder
C. Spark electrode
8. Replace sheet of insulation.