Tech Sheet

FOR SERVICE TECHNICIAN’S USE ONLY
3
Step
No.
Keypad Pressed Setting Control Display Diagnostics Mode Operation Descriptions
1 Press the timer “+” and “-”
keys (see image below) in the
following sequence:
- > + > - > + > Key Lock
1st “CO” Con guration mode
2 Press the timer “+” and “-”
keys to scroll the different
modes and press “Key Lock”
to con rm.
2nd “FS” Failure Show
3rd “DE” Delete Failure
3 Once any one of the modes “CO”, “FS” or “DE” is selected, it is possible to operate them or to exit them, and return to
the Idle screen, by pressing any one of the ON/OFF buttons. The system also automatically returns to the Idle screen if no
button is pressed for 60 seconds.
IMPORTANT: The following operations are allowed only during the  rst 5 minutes after the power cycle.
To complete con guration procedure:
SW con guration:
1. Enter in Con guration mode (CO), the number displayed by the two timers represents the number of the con guration, e.g. “3”,
“5”,is con guration number 35.
2. To select the requested con guration number, press, “+” button of the timer to increase by one unit, “-” button of the timer to
decrease by one unit. It is possible to keep pressed “+” and “-” buttons for automatic increase/decrease.
3. Once the proper con guration number has been selected and visualized by the timer digits, press “KEY LOCK” to con rm.
4. After that, the HMI starts the con guration of itself and of the IPCs of the system (2 or 3 IPCs depending on the system
con guration).
5. If the system con guration is completed:
 Successfully (i.e. all boards correctly con gured) then the HMI resets;
 Not successfully (i.e. one or more boards not correctly con gured) then the HMI generates the ERROR feedback.
In case of error turn off the system for at least 30 seconds and then repeat the procedure.
i
Auto
Auto
Key
Auto
Auto
Auto
COMMERCIAL CODE SW Con guration
KCIG550JBL 01
KCIG550JSS 01
JIC4530KB 02
JIC4530KS 02
KCIG950JBL 03
KCIG950JSS 03
JIC4930KB 04
JIC4930KS 04
KCIG556JBL 05
KCIG556JSS 05
JIC4536KB 06
JIC4536KS 06
KCIG956JBL 03
KCIG956JSS 03
JIC4936KB 04
JIC4936KS 04