Installation Guide

19
SECURE DISHWASHER
IN CABINET OPENING
Check that dishwasher is still level front to back and side
to side in the cabinet opening.
Open dishwasher door and place towel over pump assembly
and spray arm of dishwasher. This will keep screws from
falling into pump area when you are securing dishwasher
to countertop or cabinet.
Open dishwasher door to prepare for securing the dishwasher
to the countertop or side cabinet.
NOTES:
■ The dishwasher must be secured to keep it from shifting
when the door is opened or closed.
■ Do not drop screws into bottom of dishwasher.
■ Locate brackets installed in the “Choose Anchor Attachment
Method” section, either on top or on the sides of the
dishwasher.
■ If countertop anchoring: Secure dishwasher to the
countertop with two #10 x
1
/
2
" Phillips-head screws (included).
■ If side anchoring: Drill pilot holes in cabinet to avoid
splitting the wood. Secure dishwasher to cabinet with two
#10 x
1
/
2
" Phillips-head screws (included). Remove upper
rack for easier access. See the Use and Care Guide for
instructions how to remove the upper rack if needed.
45. Double-check dishwasher
alignment in cabinet opening
46. Secure dishwasher
Screw to side
cabinet
Place level against top front opening of tub. Check that
dishwasher is level from side to side. If dishwasher is not
level, adjust front legs up or down until dishwasher is level.
Level legs
Optional methodPreferred method
44. Check level side to side
and adjust legs if needed