DISHWASHER USER INSTRUCTIONS THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301. In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777. You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using the dishwasher, follow basic precautions, including the following: ■ ■ ■ ■ ■ ■ ■ Read all instructions before using the dishwasher. Use the dishwasher only for its intended function. Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.
What’s New in Your Dishwasher Energy Congratulations on purchasing your water and energy efficient dishwasher! This dishwasher cleans by spraying the dishes with water and pauses to allow the detergent to soak into and release the soils on the dishes. The cycles are longer due to the soak and pauses for exceptional cleaning. Your dishwasher contains an optical water sensor. The optical water sensor is used to determine the optimum water and energy consumption for great cleaning performance.
Parts and Features 4
Quick Steps 1 Prepare and load dishwasher. 4 Start dishwasher. 5 Unload dishwasher and clean the filter. Spin the spray arms. They should turn freely. 2 Add detergent and rinse aid. Push door firmly closed. Select the wash cycle and options, and then press START/RESUME. To use the same cycle and options used previously, press START/RESUME twice. PUSH DOWN & TU RN LO See “Recommended Time Interval to Clean Your Filter” in the “Filtration System” section for the recommended cleaning schedule.
Dishwasher Use STEP 1 STEP 2 Prepare and Load the Dishwasher Add Detergent IMPORTANT: Remove leftover food, bones, toothpicks, and other hard items from the dishes. Remove labels from containers before washing. Premeasured Detergents High quality premeasured tablets and packs are recommended for improved performance. Quality tablets and packs have been proven better than powder, liquid, or gel detergents at reducing filming on dishes.
■ Powders and Gels Water Hardness Soil Level Pre-Wash Compartment* Main Wash Compartment Soft (0-4 grains per U.S. gallon) Light None “Soft” fill line Normal None “Soft” fill line Heavy Full “Soft” fill line Medium (5-9 grains per U.S. gallon) Light Full Full** Normal Full Full** Heavy Full Full** Hard (10-14 grains per U.S. gallon) Light Full Full** Normal Full Full** Heavy Full Full** *The prewash compartment is on top of the sliding door of the dispenser.
Cycle and Option Descriptions Estimated cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option or select a different option. You can change an option anytime before the selected option begins.
OPTION SELECTIONS OPTIONS Delay displays how many hours before the cycle will begin. To delay the start: 1. Select a wash cycle and options. 2. Press the Delay button. Each time you press DELAY, it will display the next available delay time. 3. Press START to begin the delay countdown. CAN BE WHAT IT DOES SELECTED WITH Available with any cycle ADDED TIME TO CYCLE ADDED WATER GALLONS (LITERS) Delays start of a cycle up to 24 hours.
CONTROLS AND CYCLE STATUS CONTROL PURPOSE COMMENTS Press to start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle will not resume until door is closed and Start/Resume is pressed. Press to cancel wash cycle. Close the door firmly. Press and hold START/RESUME or 3 seconds. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely. To follow progress of your dishwasher cycle.
Filtration System Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water and energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require maintenance to sustain peak cleaning performance. The triple filter system consists of 2 parts, an upper filter assembly and a lower filter.
Filter Reinstallation Instructions 3. Slowly rotate the filter clockwise until it drops into place. Continue to rotate until the filter is locked into place. If the filter is not fully seated (still turns freely), continue to turn the filter clockwise until it drops and locks into place. NOTE: The Upper Filter Assembly arrow does not have to align with the arrow in the Lower Filter as long as the filter is locked. 1.
Troubleshooting First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual and scan the code with your mobile device, or visit www.whirlpool.com/product_help. In Canada, visit www.whirlpool.ca. Contact us by mail with any questions or concerns at the address below: In the U.S.A.
PROBLEM SOLUTION WATER REMAINS IN THE TUB/WILL NOT DRAIN Be sure the cycle has completed (the Clean indicator is on). If it has not, you will need to resume the cycle by closing the door and pressing Start/Resume. If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed from the disposer inlet. Check for kinks in the drain hose. Check for food obstructions in the drain or disposer. Check your house fuse or circuit breaker.
PROBLEM SOLUTION BLINKING LIGHTS Blinking indicators will occur when the cycle is paused or when the cycle has been interrupted by opening the door. In this case, the Start/Resume button LED, the Cycle Status Indicator LED(s), and the countdown bars on the Cycle Status Display all blink together to indicate that attention is needed. See “Start or Resume a Cycle” in the “Dishwasher Use” section. Blinking indicators can also occur when certain errors have been detected.
® WHIRLPOOL MAJOR APPLIANCE LIMITED WARRANTY ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call the Customer eXperience Center: ■ Name, address and telephone number ■ Model number and serial number ■ A clear, detailed description of the problem ■ Proof of purchase including dealer or retailer name and address IF YOU NEED SERVICE: 1.
INSTRUCCIONES PARA EL USUARIO DE LA LAVAVAJILLAS LE AGRADECEMOS la compra de este producto de alta calidad. Si usted experimenta un problema que no esté cubierto en SOLUCIÓN DE PROBLEMAS, visite nuestro sitio de Internet en www.whirlpool.com para obtener información adicional. Si considera que aún necesita ayuda, llámenos al 1-800-253-1301. En Canadá, visite nuestro sitio de Internet en www.whirlpool.ca o llámenos al 1-800-807-6777.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA: Cuando use la lavavajillas siga precauciones básicas, incluyendo las siguientes: ■ Lea todas las instrucciones antes de usar la lavavajillas. ■ Use la lavavajillas únicamente para las funciones que fue diseñada. Use únicamente detergentes o agentes de enjuague recomendados para ser usados en las lavavajillas y manténgalos fuera del alcance de los niños.
QUÉ HAY DE NUEVO EN SU LAVAVAJILLAS Energía ¡Felicitaciones por haber comprado la lavavajillas con bajo consumo de agua y energía! Esta lavavajillas limpia rociando la vajilla con agua y hace pausas para permitir que el detergente remoje la vajilla y afloje la suciedad de los platos. Para obtener una limpieza excepcional, los ciclos se hacen más largos debido al remojo y las pausas. Varios modelos tienen un sensor óptico de agua.
Piezas y características 20
Pasos rápidos 1 4 Prepare y cargue la lavavajillas. Empuje la puerta para cerrarla con firmeza. Seleccione el ciclo y las opciones de lavado; después, presione START/ RESUME (Inicio/Reanudar). Para usar el mismo ciclo y las opciones utilizados previamente, presione START/RESUME (Inicio/ Reanudar) dos veces. Haga girar los brazos rociadores. Deben girar libremente. 2 Ponga la lavavajillas en marcha. Agregue el detergente y el agente de enjuague. 5 Saque la lavavajillas y el filtro y límpielo.
Uso de la lavavajillas ■ PASO 1 Prepare y cargue la lavavajillas Verifique que no haya nada que bloquee los brazos rociadores superior o inferior. Los artículos que están en la canasta pueden bloquear los brazos rociadores. IMPORTANTE: Quite los restos de alimentos, huesos, palillos y otros artículos duros de los platos. Quite las etiquetas de los recipientes antes de lavarlos.
Polvos y geles Dureza del agua Blanda (0-4 granos por galón de EE.UU.) .
PASO 4 PASO 5 Seleccione un ciclo (los ciclos varían según el modelo) Inicie o reanude un ciclo Vea las tablas de “Descripción de ciclos y opciones” en la sección siguiente. Los ciclos y las opciones más intensos afectarán la duración del ciclo. ■ Deje correr agua caliente en el fregadero que esté más cerca de la lavavajillas hasta que el agua salga caliente. Cierre la llave del agua.
Descripción de ciclos y opciones Es posible que los tiempos estimados de los ciclos incrementen o bajen según la temperatura del agua, las condiciones de suciedad, el tamaño de la carga y las opciones seleccionadas. Usted puede personalizar su ciclo seleccionando una opción. Vea las selecciones de opciones. Si cambia de parecer, oprima la opción otra vez para apagarla o seleccione una opción diferente. Usted puede cambiar una opción en cualquier momento antes de que dicha opción seleccionada comience.
SELECCIONES DE OPCIONES OPCIONES PUEDE SELECCIO NAR-SE CON LO QUE HACE TIEMPO ADICIONAL DEL CICLO AGUA ADICIONAL EN GALONES (LITROS) Delay (Retraso) muestra en la pantalla las horas restantes Disponible Retrasa el inicio hasta el comienzo del ciclo. con de un ciclo hasta cualquier por un máximo Para retrasar el inicio: ciclo de 24 horas. 1. Seleccione un ciclo y opciones de lavado. 2. Presione el botón Delay (Retraso).
CONTROLES Y ESTADO DE LOS CICLOS CONTROL PROPÓSITO COMENTARIOS Presione para iniciar o reanudar un ciclo de lavado. Si se abre la puerta durante un ciclo o si se interrumpe el suministro de energía, destellará la LED del botón Start/Resume (Inicio/Reanudar). El ciclo no se reanudará hasta que se cierre la puerta y se presione Start/ Resume (Inicio/Reanudar). Presione para cancelar el ciclo de lavado. Cierre la puerta con firmeza. Mantenga presionado START/RESUME (Inicio/Reanudar) durante 3 segundos.
Sistema de filtración Su lavavajillas cuenta con lo último en tecnología de filtración para lavavajillas. Este sistema de filtración triple minimiza los sonidos y optimiza el ahorro de agua y energía mientras proporciona una limpieza superior. Durante la vida útil de su lavavajillas, el filtro necesitará mantenimiento para conservar el rendimiento óptimo de limpieza. El sistema de tres filtros consta de 2 piezas, un ensamblaje de filtro superior y un filtro inferior.
Instrucciones para reinstalar los filtros 3. Rote lentamente el filtro hacia la derecha hasta que caiga en su lugar. Continúe rotando hasta que el filtro quede trabado en su lugar. Si el filtro no encaja completamente (sigue girando libremente), continúe girando el filtro hacia la derecha hasta que caiga y quede trabado en su lugar. NOTA: No es necesario que la flecha del ensamblaje del filtro superior esté alineada con la flecha en el filtro inferior, siempre y cuando el filtro quede trabado. 1.
Solución de problemas Pruebe primero las soluciones sugeridas aquí. Si necesita asistencia adicional o más recomendaciones que pueden ayudarle a evitar una llamada de servicio técnico, consulte la página de la garantía de este manual y escanee el código con su dispositivo móvil o visite www.whirlpool.com/product_help En Canadá, visite www.whirlpool.ca Contáctenos por correo con sus dudas o preguntas a la dirección que se detalla a continuación: En Canadá En los EE.UU.
PROBLEMA SOLUCIÓN QUEDA AGUA EN LA TINA/NO DESAGUA Asegúrese de que se haya terminado el ciclo [la luz de Clean (Limpio) está encendida]. Si no se ha terminado, deberá reanudar el ciclo cerrando la puerta y presionando START/RESUME (Inicio/Reanudar). Si la lavavajillas está conectada a un recipiente de desechos alimenticios, asegúrese de haber quitado el tapón del disco removible de la entrada del recipiente de desechos. Revise si la manguera de desagüe está retorcida.
PROBLEMA SOLUCIÓN LUCES DESTELLANDO Los LED destellarán cuando haya una pausa en el ciclo o cuando se haya interrumpido el mismo abriendo la puerta. En este caso, el LED del botón de Start/Resume (Inicio/Reanudar), el (los) LED del indicador de estado de ciclo y las barras de la cuenta regresiva en la pantalla de estado del ciclo destellarán todos juntos para indicar que se necesita prestar atención. Vea “Inicio o reanudación de un ciclo” en la sección “Uso de la lavavajillas”.
GARANTÍA LIMITADA DE LOS ELECTRODOMÉSTICOS PRINCIPALES DE WHIRLPOOL® ADJUNTE SU RECIBO AQUÍ. SE REQUIERE LA PRUEBA DE COMPRA PARA OBTENER SERVICIO BAJO LA GARANTÍA. Tenga a mano la siguiente información cuando llame al Centro para la eXperiencia del cliente: ■ Nombre, dirección y número de teléfono ■ Número de modelo y de serie ■ Una descripción clara y detallada del problema ■ Prueba de compra incluido el nombre y la dirección del distribuidor o vendedor SI NECESITA SERVICIO TÉCNICO: 1.
INSTRUCTIONS D'UTILISATION DU LAVE-VAISSELLE Nous vous REMERCIONS d'avoir acheté ce produit de haute qualité. Si vous rencontrez un problème non mentionné dans la section DÉPANNAGE, veuillez visiter notre site Web www.whirlpool.com pour des informations supplémentaires. Si vous avez toujours besoin d'assistance, veuillez nous téléphoner au 1-800-253-1301. Au Canada, visitez notre site Web www.whirlpool.ca ou appelez-nous au 1-800-807-6777.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ AVERTISSEMENT : Lors de l’utilisation du lave-vaisselle, suivre les précautions élémentaires dont les suivantes : ■ ■ ■ ■ ■ ■ ■ Lire la totalité des instructions avant d’utiliser le lave-vaisselle. N’utiliser le lave-vaisselle que pour laver la vaisselle. Utiliser uniquement les détersifs ou agents de rinçage recommandés pour lave-vaisselle et les garder hors de la portée des enfants.
QUOI DE NEUF DANS VOTRE LAVE-VAISSELLE Énergie Félicitations pour l’achat de votre lave-vaisselle éconergique à faible consommation d’eau! Pour nettoyer les articles, ce lave-vaisselle asperge la vaisselle d’eau puis fait une pause pour permettre au détergent d’imprégner et de dissoudre les saletés. Les périodes de trempage et de pause prolongent la durée des programmes pour un nettoyage exceptionnel. Plusieurs modèles comportent un capteur optique d’eau.
Pièces et caractéristiques 37
Étapes rapides 1 4 Préparer et charger le lave-vaisselle. Bien fermer la porte. Sélectionner le programme de lavage et les options, puis appuyer sur START/ RESUME (mise en marche/ reprise). Pour employer les mêmes options et le même programme utilisés lors du lavage précédent, appuyer deux fois sur START/RESUME (mise en marche/reprise). Faire tourner les bras d’aspersion. Ils doivent pouvoir tourner librement. 2 Mettre en marche le lave-vaisselle. Verser le détergent et l’agent de rinçage.
Utilisation du lave-vaisselle ■ ÉTAPE 1 Préparation et chargement du lave-vaisselle S’assurer que rien n’entrave le mouvement des bras d’aspersion inférieur ou supérieur. Les articles du panier peuvent entraver les bras d’aspersion. IMPORTANT : Enlever les restes alimentaires, os, cure-dents et autres articles durs de la vaisselle. Enlever les étiquettes des récipients avant de les laver.
Produits sous forme de poudre ou de gel Aucun Ligne de remplissage min. Saleté importante Remplir à sa Ligne de pleine capacité remplissage min.
ÉTAPE 4 ÉTAPE 5 Sélectionner un programme (les programmes varient selon les modèles) Démarrer ou reprendre un programme ■ Voir les tableaux “Descriptions des programmes et des options” dans la section qui suit. Des programmes et options plus complets affectent la durée du programme. Laisser couler l’eau du robinet le plus proche du lave-vaisselle jusqu’à ce qu’elle soit chaude. Fermer le robinet.
Description des programmes et options Les durées maximales de lavage dépendent de la température de l'eau, du degré de saleté, de la taille de la charge de vaisselle, ainsi que des options sélectionnées. On peut personnaliser chaque programme en sélectionnant une option. Voir les sélections d'options. En cas de changement d'avis, appuyer sur cette option à nouveau pour la désactiver, ou sélectionner une option différente.
SÉLECTION D'OPTIONS OPTIONS PEUT ÊTRE SÉLECTIONNÉ AVEC Delay (lavage différé) affiche le nombre d’heures Disponible pour restantes avant le démarrage du programme. tous les programmes Pour différer la mise en marche : 1. Choisir un programme de lavage et des options. 2. Appuyer sur le bouton de mise en marche différée. À chaque pression sur le bouton DELAY (lavage différé), l’appareil affiche la prochaine durée disponible de lavage différé. 3.
STATUT DES COMMANDES ET PROGRAMMES Commande Fonction Commentaires Appuyer sur cette touche pour démarrer ou poursuivre un programme de lavage. Si l'on ouvre la porte durant un programme ou si une panne de courant se produit, la DEL du bouton Start/Resume (mise en marche/reprise) clignote. Le programme ne reprend pas tant que l'on ne ferme pas la porte et que l'on n'appuie pas sur Start/Resume (mise en marche/reprise). Appuyer sur cette touche pour annuler le programme de lavage. Bien fermer la porte.
Système de filtration Ce lave-vaisselle est équipé de la plus récente technologie en matière de filtration. Ce système de triple filtration minimise le niveau sonore et optimise l'économie d’eau et d’énergie tout en offrant une performance de nettoyage supérieure. Le filtre doit être entretenu tout au long de la durée de vie du lave-vaisselle pour pouvoir continuer à fonctionner au meilleur de sa performance. Le système de triple filtre comporte 2 parties, un filtre supérieur et un filtre inférieur.
Instructions de réinstallation du filtre 3. Faire pivoter lentement le filtre dans le sens horaire jusqu’à ce qu’il s’insère dans l’encastrement. Continuer à faire pivoter le filtre jusqu’à ce qu’il s’emboîte. Si le filtre n’est pas complètement installé (continue de tourner librement), continuer à tourner le filtre dans le sens horaire jusqu’à ce qu’il s’insère dans le logement et s'emboîte.
Dépannage Essayez d'abord les solutions suggérées ici. Pour obtenir de l'aide ou des conseils qui permettront peut-être d'éviter une intervention de dépannage, consultez la page de garantie de ce manuel et balayez le code avec votre appareil intelligent ou consultez le site Web www.whirlpool.com/product_help ou www.whirlpool.ca.
PROBLÈME SOLUTION PAS DE REMPLISSAGE Vérifier que le robinet d'alimentation en eau du lave-vaisselle est ouvert. Vérifier l'absence d'obstruction du flotteur. Voir “Pièces et caractéristiques”. Vérifier l'absence de mousse dans le lave-vaisselle. En cas de présence de mousse, le lave-vaisselle peut ne pas fonctionner correctement ou ne pas se remplir d'eau. Voir la section “Témoins lumineux clignotants” dans la section “Dépannage”.
PROBLÈME SOLUTION VAISSELLE SALE/ ACCUMULATION DE MOUSSE DANS LE LAVEVAISSELLE/PROGRAMME NON TERMINÉ Si le système de détection du lave-vaisselle détecte la présence de mousse, il est possible que le lave-vaisselle ne fonctionne pas correctement ou ne se remplisse pas d'eau. La production de mousse peut avoir été causée par : ■ L'emploi du mauvais type de détergent comme un produit à vaisselle pour nettoyage manuel, un produit de lessive ou un savon pour les mains.
GARANTIE LIMITÉE DES GROS APPAREILS MÉNAGERS WHIRLPOOL® ATTACHEZ ICI VOTRE REÇU DE VENTE. UNE PREUVE D’ACHAT EST OBLIGATOIRE POUR OBTENIR L'APPLICATION DE LA GARANTIE.