Use and Care Guide

9
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH
WHAT IT
DOES
ADDED
TIME
TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
Delay displays how many hours before the cycle will
begin.
To delay the start:
1. Select a wash cycle and options.
2. Press the Delay button. Each time you press DELAY,
it will display the next available delay time.
3. Press START to begin the delay countdown.
Available
with any
cycle
Delays start of
acycle up to
24 hours.
NOTE: If the door is opened, such as to add a dish, the Start button must be pressed to resume the delay countdown.
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certied residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal
and sanitization efcacy. There is no intention, either
directly or indirectly, that all cycles on a NSF/ANSI
184 certied dishwasher meet the NSF/ANSI 184
performance standard for soil removal and sanitization
efcacy.
Sani Rinse indicator is lit at the end of the cycle if
the Sani Rinse option was successfully completed. If
indicator does not light, it is probably due to the cycle
being interrupted.
Sensor
Heavy
Normal
Raises the
main wash
temperature
to 135°F
(57°C) and
the nal rinse
temperature to
156°F (69°C).
0:05 to 1:06 0 to 3.9
(0 to 14.6)
Raises water temperature to improve cleaning for
loads containing tough, baked-on food.
Sensor
Heavy
Normal
Raises the
main wash
temperature to
135°F (57°C).
0:05 to 0:13 0 to 3.9
(0 to 14.6)
Turns the heating element on at the end of the wash
portion of the cycle. Its shorter heating time uses
signicantly less energy compared to using Heat Dry.
Available
with any
cycle
0:11 0
Dries dishes with heat. This option, with the use of
rinse aid, will provide the best drying results. Plastic
items are less likely to deform when loaded in the top
rack. Use Heat Dry for optimum drying performance or
turn the Heat Dry option off for air dry.
Sensor
Heavy
Normal
1-Hour Wash
Uses a heating
element to
speed drying
times. Heat Dry
option defaults
to ON when
any cycle is
selected except
for 1-Hour
Wash and
Light.
0:08 to 0:46 0
Use the Control Lock option to avoid unintended use of dishwasher between cycles, or cycle and option changes
during a cycle.
To turn on Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light will stay on for a short time,
indicating that it is activated. When the Lock indicator is lit, all buttons are disabled. If you press any button while your
dishwasher is locked, the light ashes 3 times. The dishwasher door can still be opened/closed while the controls are
locked.
To turn off Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light turns off.
Delay
Sani
Rince
Hi Temp
Wash
Light
Dry
Heat
Dry
Control
Lock