DISHWASHER USER INSTRUCTIONS THANK YOU for purchasing this high-quality product. Register your new dishwasher at www.whirlpool.com. In Canada, visit our website at www.whirlpool.ca. For future reference please make a note of your product model and serial numbers. These can be located near the door on the righthand or left-hand side of the dishwasher interior.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using the dishwasher, follow basic precautions, including the following: ■ ■ ■ ■ ■ ■ ■ Read all instructions before using the dishwasher. Use the dishwasher only for its intended function. Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.
What’s New in Your Dishwasher Energy Congratulations on purchasing your water and energy efficient dishwasher! This dishwasher cleans by spraying the dishes with water and pauses to allow the detergent to soak into and release the soils on the dishes. The cycles are longer due to the soak and pauses for exceptional cleaning. Your dishwasher contains an optical water sensor. The optical water sensor is used to determine the optimum water and energy consumption for great cleaning performance.
Parts and Features Upper level wash Total Coverage Spray Arm (on some models) cleans with twice the jets for more coverage. A smarter sequence of spray patterns from multiple nozzles hits dishes throughout the cycle. Water feed tube Model and serial number label Water inlet opening Heating element Overfill protection float Rinse aid dispenser reduces spotting and improves drying. Resource Efficient Wash System removes soil from water and improves cleaning action.
Quick Steps 1 Remove bulk food and load dishwasher. 3 Select a cycle and options (varies by model). 4 Start dishwasher. 5 Unload dishwasher and clean the filter. Scrape off excess food into garbage or food disposer. Load dishes so that water spray will reach every surface. 2 Add detergent and rinse aid. To start and resume a cycle, press START/RESUME and close the door within 4 seconds. If the door is not closed within 4 seconds, the Start/Resume LED will flash, and the cycle will not start.
Dishwasher Use STEP 1 STEP 2 Prepare and Load the Dishwasher Add Detergent IMPORTANT: Remove leftover food, bones, toothpicks, and other hard items from the dishes. Remove labels from containers before washing. NOTE: If you do not plan to run a wash cycle soon, run a rinse cycle. Do not use detergent. ■■ Use automatic dishwasher detergent only. Add powder, liquid, or tablet detergent just before starting a cycle.
STEP 3 STEP 4 Select a Cycle Add Rinse Aid ■■ Your dishwasher is designed to use rinse aid for good drying performance. Without rinse aid, your dishes and dishwasher interior will have excessive moisture. The Heat Dry option will not perform as well without rinse aid. ■■ Rinse aid keeps water from forming droplets that can dry as spots or streaks. They also improve drying by allowing water to drainoff of the dishes after the final rinse. ■■ Check the rinse aid indicator.
Cycle and Option Descriptions Estimated cycle times may increase or decrease, depending on water temperature, soil conditions, dish load size, and options selected. You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option or select a different option. You can change an option anytime before the selected option begins.
OPTION SELECTIONS OPTIONS Runs dishwasher at a later time. Select a wash cycle and options. Each time you press the Delay keypad, it will display the next available delay time. Press DELAY. Press the START/ RESUME keypad. Close door firmly. NOTES: ■■ The dishwasher remembers the last Delay you selected. To reset the delay time to something other than what is displayed, continue to press the Delay keypad until the desired delay time is reached.
CONTROLS AND CYCLE STATUS Control Purpose Comments Press to start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start/Resume LED flashes. The cycle will not resume until Start/Resume is pressed and the door is closed. NOTE: Push door firmly closed within 4 seconds of pressing Start/Resume or the dishwasher will not start. If door is not closed within 4 seconds, the Start/Resume LED will flash when the door is closed. Press to cancel wash cycle.
3. With the retaining tab released, pull the track stop straight toward the opposite track to remove it. 4. After removing both track stops, gently pull the top rack out of the tracks by rolling it toward you. 5. Replace the track stops by coming up from under the track and slipping the lower tab of the track stop into the lower slot of the track (see Track stop – right) and rotate the track stop into place. Then press on the edge of the ridged area while pushing the track stop straight toward the track.
2. Insert the upper filter assembly into the circular opening in the lower filter. Locating tab LO Cleaning Instructions IMPORTANT: Do not use wire brushes, scouring pads, etc., as they may damage the filters. Rinse filter under running water until most soils are removed. If you have hard-to-remove soils or calcium deposits from hard water, a soft brush may be required.
Troubleshooting First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual and scan the code with your mobile device, or visit www.producthelp.whirlpool.com In Canada, visit www.whirlpool.ca. Contact us by mail with any questions or concerns at the address below: In the U.S.A.
PROBLEM SOLUTION WATER REMAINS IN THE TUB/WILL NOT DRAIN Be sure the cycle has completed (the Clean indicator is on). If it has not, you will need to resume the cycle by pressing Start/Resume and closing the door within 4 seconds. If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed from the disposer inlet. Check for kinks in the drain hose. Check for food obstructions in the drain or disposer. Check your house fuse or circuit breaker.
PROBLEM SOLUTION BLINKING LIGHTS Blinking indicators will occur when the cycle is paused or when the cycle has been interrupted by opening the door. If the Start/Resume light is blinking, press the START/RESUME keypad and close the door within 4 seconds. See “Start or Resume a Cycle” in the “Dishwasher Use” section. If the Clean light or any other lights are blinking and the dishwasher will not run, call for service.
WHIRLPOOL® MAJOR APPLIANCE LIMITED WARRANTY ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call the Customer eXperience Center: ■ Name, address, and telephone number ■ Model number and serial number ■ A clear, detailed description of the problem ■ Proof of purchase, including dealer or retailer name and address IF YOU NEED SERVICE: 1.
INSTRUCCIONES PARA EL USUARIO DE LA LAVAVAJILLAS LE AGRADECEMOS la compra de este producto de alta calidad. Registre su nueva lavavajillas en www.whirlpool.com. En Canadá, registre su lavavajillas en www.whirlpool.ca. Para referencia futura, tome nota del número de modelo y de serie del producto. Los puede encontrar cerca de la puerta en el lado derecho o izquierdo del interior de la lavavajillas.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA: Cuando use la lavavajillas siga precauciones básicas, incluyendo las siguientes: ■ ■ ■ ■ ■ ■ Lea todas las instrucciones antes de usar la lavavajillas. Use la lavavajillas únicamente para las funciones que fue diseñada. Use únicamente detergentes o agentes de enjuague recomendados para ser usados en las lavavajillas y manténgalos fuera del alcance de los niños.
Qué hay de nuevo en su lavavajillas Energía ¡Felicitaciones por haber comprado la lavavajillas con bajo consumo de agua y energía! Esta lavavajillas limpia rociando la vajilla con agua y hace pausas para permitir que el detergente remoje la vajilla y afloje la suciedad de los platos. Para obtener una limpieza excepcional, los ciclos se hacen más largos debido al remojo y las pausas.
Piezas y características Lavado del nivel superior El brazo de rociado de cobertura total (en algunos modelos) limpia con el doble de surtidores para mayor cobertura. Una secuencia más inteligente de patrones de rociado desde múltiples boquillas llega a los platos a lo largo de todo el ciclo.
Pasos rápidos 1 Elimine los restos grandes de alimentos y cargue la lavavajillas. 3 Seleccione un ciclo y las opciones (varía según el modelo). 4 Ponga la lavavajillas en marcha. 5 Descargue la lavavajillas y limpie el filtro. Bote los restos de alimento de los platos a la basura o al recipiente de desechos alimenticios. Coloque los platos de manera que el rociador de agua pueda alcanzar todas las superficies. 2 Agregue el detergente y el agente de enjuague.
Uso de la lavavajillas PASO 1 PASO 2 Prepare y cargue la lavavajillas Agregue detergente IMPORTANTE: Quite de los platos los restos de alimentos, huesos, palillos y otros elementos duros. Quite las etiquetas de los recipientes antes de lavarlos. NOTA: Si no va a hacer funcionar un ciclo de lavado de inmediato, haga funcionar un ciclo de enjuague. No use detergente. ■■ Use únicamente detergentes para lavavajillas automáticas.
Seleccione las opciones PASO 3 Agente de enjuague ■■ Para obtener un buen secado, su lavavajillas ha sido diseñada para usar agente de enjuague. Si no usa agente de enjuague, los platos y el interior de la lavavajillas tendrán demasiada humedad. La opción de Heat Dry (secado con calor) no funcionará tan bien sin usar el agente de enjuague. ■■ Los agentes de enjuague evitan que el agua forme gotitas que pueden secarse como manchas o rayas.
Descripción de ciclos y opciones Es posible que los tiempos estimados de los ciclos aumenten o disminuyan según la temperatura del agua, las condiciones de suciedad, el tamaño de la carga y las opciones seleccionadas. Para personalizar su ciclo debe seleccionar una opción. Vea las selecciones de opciones. Si cambia de parecer, oprima la opción otra vez para apagarla o seleccione una opción diferente. Se puede cambiar una opción en cualquier momento antes de que dicha opción seleccionada comience.
SELECCIONES DE OPCIONES OPCIONES SE PUEDE SELECCIONAR CON Disponible con Hace funcionar la lavavajillas en un cualquier ciclo momento más tarde. Seleccione un ciclo y opciones de lavado. Cada vez que presione el botón Delay (Retraso), se mostrará en pantalla la siguiente hora de retraso disponible. Oprima DELAY (Retraso). Presione START/RESUME (Inicio/Reanudar). Cierre la puerta con firmeza. NOTAS: ■■ La lavavajillas recuerda el último retraso que seleccionó.
OPCIONES SE PUEDE SELECCIONAR CON LO QUE HACE TIEMPO AGUA AGREGADO AGREGADA AL CICLO EN GALONES (LITROS) Evita el uso no intencionado de la lavavajillas entre los ciclos o el cambio de ciclos u opciones durante un ciclo. Para activar el bloqueo de los controles, mantenga presionado CONTROL LOCK (Bloqueo de control) por 3 segundos. La luz de Control Lock (Bloqueo de control) permanecerá encendida durante un tiempo corto, indicando que está activada, y todos los botones se desactivarán.
Características de la lavavajillas Canastilla para cubiertos AnyWare™ La canastilla para cubiertos AnyWare™ puede colgarse en la puerta, en la canasta inferior o colocarse en el interior de esta última. Posición de la puerta Posición de la canasta Para retirar la canasta: 1. Para lograr acceso a los topes de la guía, tire la canasta superior hacia adelante hasta que la mitad esté fuera de la cuba. 2.
Sistema de filtración Su lavavajillas cuenta con lo último en tecnología de filtración para lavavajillas. Este sistema de filtración minimiza los sonidos y optimiza el ahorro de agua y energía mientras proporciona una limpieza superior. El sistema de filtros consiste de 2 piezas, un ensamblaje de filtro superior y un filtro inferior. IMPORTANTE: Para evitar dañar la lavavajillas, no la ponga en marcha sin que los filtros estén adecuadamente instalados.
Instrucciones para reinstalar los filtros 1. Consulte las ilustraciones anteriores y coloque el filtro inferior debajo de las lengüetas de ubicación en el fondo de la lavavajillas para que la abertura redonda para el ensamblaje del filtro superior esté alineada con la abertura redonda en el fondo de la cuba. 2. Inserte el ensamblaje del filtro superior dentro de la abertura circular en el filtro inferior. Lengüeta de ubicación PUS HD OW 3.
Solución de problemas Pruebe primero las soluciones sugeridas aquí. Si necesita asistencia adicional o más recomendaciones que pueden ayudarle a evitar una llamada de servicio técnico, consulte la página de la garantía de este manual y escanee el código con su dispositivo móvil o visite www.producthelp.whirlpool.com. En Canadá, visite www.whirlpool.ca. Contáctenos por correo con sus preguntas o dudas a la dirección que aparece a continuación: En los EE. UU.
PROBLEMA SOLUCIÓN NO SE LLENA Asegúrese de que la llave de agua a la lavavajillas esté abierta. Verifique que el flotador esté libre de obstrucciones. Consulte la sección “Piezas y características”. Verifique si hay espuma en la lavavajillas. Si se detecta espuma, es posible que la lavavajillas no funcione correctamente o que no se llene de agua. Consulte “Luces destellando” en la sección “Solución de problemas”. QUEDA AGUA EN LA CUBA/NO DESAGUA Asegúrese de que haya terminado el ciclo.
PROBLEMA SOLUCIÓN PLATOS SUCIOS/ESPUMA EN LA LAVAVAJILLAS/ CICLO INCOMPLETO Si el sistema de sensor de la lavavajillas detecta espuma, es posible que la lavavajillas no funcione correctamente o que no se llene de agua. La espuma puede ser ocasionada por lo siguiente: ■■ Uso del tipo incorrecto de detergente, como podría ser un detergente para lavar los platos a mano, detergente para ropa o jabón de tocador.
GARANTÍA LIMITADA DE LOS ELECTRODOMÉSTICOS PRINCIPALES DE WHIRLPOOL® ADJUNTE SU RECIBO AQUÍ. SE REQUIERE LA PRUEBA DE COMPRA PARA OBTENER SERVICIO BAJO LA GARANTÍA. Tenga a mano la siguiente información cuando llame al Centro para la eXperiencia del cliente: ■ Nombre, dirección y número de teléfono ■ Número de modelo y de serie ■ Una descripción clara y detallada del problema ■ Prueba de compra incluido el nombre y la dirección del distribuidor o vendedor SI NECESITA SERVICIO TÉCNICO: 1.
INSTRUCTIONS D’UTILISATION DU LAVE-VAISSELLE Nous vous REMERCIONS d’avoir acheté ce produit de haute qualité. Enregistrez votre nouveau lave-vaisselle sur www.whirlpool.com. Au Canada, visitez notre site Web www.whirlpool.ca. Pour référence ultérieure, consignez par écrit les numéros de modèle et de série de votre produit. Vous les trouverez près de la porte sur le côté droit ou gauche de l’intérieur du lave-vaisselle.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ AVERTISSEMENT : Lors de l’utilisation du lave-vaisselle, suivre les précautions élémentaires dont les suivantes : ■ ■ ■ ■ ■ ■ Lire la totalité des instructions avant d’utiliser le lave-vaisselle. N’utiliser le lave-vaisselle que pour laver la vaisselle. Utiliser uniquement les détersifs ou agents de rinçage recommandés pour lave-vaisselle et les garder hors de la portée des enfants.
Quoi de neuf dans votre lave-vaisselle Énergie Félicitations pour l’achat de votre lave-vaisselle éconergique à faible consommation d’eau! Pour nettoyer les articles, ce lave-vaisselle asperge la vaisselle d’eau, puis fait une pause pour permettre au détergent d’imprégner et de dissoudre les saletés. Les périodes de trempage et de pause prolongent la durée des programmes pour un nettoyage exceptionnel. Plusieurs modèles comportent un capteur optique d’eau.
Pièces et caractéristiques Lavage au niveau supérieur Le bras d’aspersion à couverture totale (sur certains modèles) nettoie avec 2 fois plus de jets pour assurer une grande couverture. Une séquence d’aspersion plus intelligente projetée de plusieurs embouts atteint la vaisselle pendant tout le programme.
Étapes rapides 1 Retirer les gros morceaux d’aliments et charger le lave-vaisselle. 3 Choisir un programme et des options (varie selon le modèle). 4 Mettre en marche le lave-vaisselle. 5 Décharger le lavevaisselle et nettoyer le filtre. Jeter les aliments en trop dans la poubelle ou le broyeur d’aliments. Charger les articles de manière à ce que les jets d’eau atteignent toutes les surfaces. 2 Ajouter le détergent et l’agent de rinçage.
Utilisation du lave-vaisselle ÉTAPE 1 ÉTAPE 2 Préparation et chargement du lave-vaisselle Ajout de détergent IMPORTANT : Enlever de la vaisselle les restes alimentaires, os, cure-dents et autres articles durs. Enlever les étiquettes des récipients avant de les laver. REMARQUE : Si un programme de lavage n’est pas prévu dans l’immédiat, exécuter un programme de rinçage. Ne pas utiliser de détergent. ■■ Utiliser uniquement du détergent pour lave-vaisselle automatique.
Sélection des Options ÉTAPE 3 Ajout d’agent de rinçage ■■ Votre lave-vaisselle est conçu pour utiliser un agent de rinçage pour un séchage satisfaisant. Sans agent de rinçage, la vaisselle et l’intérieur du lave-vaisselle seront trop humides. L’option Heat Dry (séchage avec chaleur) ne fonctionnera pas de manière optimale sans agent de rinçage. ■■ Les agents de rinçage empêchent l’eau de former des gouttelettes qui peuvent sécher en laissant des taches ou coulées.
Description des programmes et options Les durées de lavage dépendent de la température de l’eau, du degré de saleté, de la taille de la charge de vaisselle, ainsi que des options sélectionnées. On peut personnaliser chaque programme en sélectionnant une option. Voir les sélections d’options. En cas de changement d’avis, appuyer sur cette option à nouveau pour la désactiver ou sélectionner une option différente. Il est possible de changer une option en tout temps avant que l’option choisie ne commence.
SÉLECTION D’OPTIONS OPTIONS Diffère le fonctionnement du lave-vaisselle. Choisir un programme de lavage et des options. À chaque pression du bouton Delay (mise en marche différée), le démarrage différé suivant apparaît sur l’afficheur. Appuyer sur DELAY (mise en marche différée). Appuyer sur START/RESUME (mise en marche/reprise). Bien fermer la porte. REMARQUES : 42 ■■ Le lave-vaisselle garde en mémoire la dernière mise en marche différée sélectionnée.
OPTIONS PEUT ÊTRE DESCRIPTION DURÉE SÉLECTIONNÉ SUPPLÉAVEC MENTAIRE DU PROGRAMME Augmente la température du lavage principal pour améliorer le nettoyage des charges comportant des résidus alimentaires cuits ou très adhérents. Sensor Heavy Normal Soak & Clean Fait passer la température du lavage principal à 135 °F (57 °C).
Caractéristiques du lave-vaisselle Panier à couverts AnyWare™ Le panier à couverts AnyWare™ peut être suspendu à la porte, au panier inférieur ou placé à l’intérieur du panier inférieur. Position sur la porte Position sur le panier Pour retirer le panier : 1. Pour accéder aux butées de glissières, tirer le panier supérieur vers l’avant pour l’extraire de la cuve de presque la moitié. 2.
Système de filtration Ce lave-vaisselle est équipé de la plus récente technologie en matière de filtration. Ce système de filtration minimise le niveau sonore et optimise la consommation d’eau et d’énergie tout en offrant une performance de nettoyage supérieure. Le système de filtre comporte 2 parties, un filtre supérieur et un filtre inférieur. IMPORTANT : Afin d’éviter d’endommager le lave-vaisselle, ne pas le faire fonctionner sans que les filtres ne soient correctement installés.
Instructions de réinstallation du filtre 1. En s’aidant des illustrations précédentes, placer le filtre inférieur sous les onglets de positionnement situés au fond du lave-vaisselle de sorte que le filtre supérieur soit aligné avec l’ouverture circulaire du fond de la cuve. 2. Insérer le filtre supérieur dans l’ouverture circulaire du filtre inférieur. Patte de positionnement PUS HD OW 3. Faire pivoter lentement le filtre dans le sens horaire jusqu’à ce qu’il s’insère dans l’encastrement.
Dépannage Essayez d’abord les solutions suggérées ici. Pour obtenir de l’aide ou des conseils qui permettront peut-être d’éviter une intervention de dépannage, consultez la page de garantie de ce manuel et balayez le code QR avec votre appareil mobile ou visitez le site www.producthelp.whirlpool.com. Au Canada, visiter le www.whirlpool.ca.
PROBLÈME SOLUTION PAS DE REMPLISSAGE Vérifier que le robinet d’alimentation en eau du lave-vaisselle est ouvert. Vérifier l’absence d’obstruction du flotteur. Consulter la section “Pièces et caractéristiques”. Vérifier l’absence de mousse dans le lave-vaisselle. En cas de présence de mousse, le lave-vaisselle peut ne pas fonctionner correctement ou ne pas se remplir d’eau. Consulter le point “Témoins lumineux clignotants” de la section “Dépannage”.
PROBLÈME SOLUTION VAISSELLE SALE/ ACCUMULATION DE MOUSSE DANS LE LAVE-VAISSELLE/ PROGRAMME NON TERMINÉ Si le système de détection du lave-vaisselle détecte la présence de mousse, il est possible que le lave-vaisselle ne fonctionne pas correctement ou ne se remplisse pas d’eau. La production de mousse peut avoir été causée par : ■■ L’emploi du mauvais type de détergent, comme un produit à vaisselle pour lavage manuel, un produit de lessive ou un savon pour les mains.
GARANTIE LIMITÉE DES GROS APPAREILS MÉNAGERS WHIRLPOOL® ATTACHEZ ICI VOTRE REÇU DE VENTE. UNE PREUVE D’ACHAT EST OBLIGATOIRE POUR OBTENIR L’APPLICATION DE LA GARANTIE.
NOTES 51
W11049297A /™ ©2017 Whirlpool. Utilisé sous licence au Canada. Tous droits réservés.