DISHWASHER USER INSTRUCTIONS THANK YOU for purchasing this high-quality product. Register your new dishwasher at www.whirlpool.com. In Canada, visit our website at www.whirlpool.ca. For future reference please make a note of your product model and serial numbers. These can be located near the door on the righthand or left-hand side of the dishwasher interior.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using the dishwasher, follow basic precautions, including the following: ■ ■ ■ ■ ■ ■ ■ Read all instructions before using the dishwasher. Use the dishwasher only for its intended function. Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.
What’s New in Your Dishwasher Energy Congratulations on purchasing your water- and energy-efficient dishwasher! This dishwasher cleans by spraying the dishes with water and pauses to allow the detergent to soak into and release the soils on the dishes. The cycles are longer due to the soak and pauses for exceptional cleaning. Your dishwasher contains an optical water sensor. The optical water sensor is used to determine the optimum water and energy consumption for great cleaning performance.
Parts and Features Upper level wash Water feed tube Lower spray arm has pressurized sprays that provide effective cleaning. Model and serial number label Water inlet opening Heating element Overfill protection float Rinse aid dispenser reduces spotting and improves drying. Resource Efficient Wash System removes soil from water and improves cleaning action.
Quick Steps 1 Remove bulk food and load dishwasher. 3 Select a cycle and options. 4 Start dishwasher. 5 Unload dishwasher and clean the filter. Scrape off excess food into garbage or food disposer. Load dishes so that water spray will reach every surface. 2 Add detergent and rinse aid. SLIDE SLIDE To start and resume a cycle, press START/RESUME and close the door within 4 seconds. If the door is not closed within 4 seconds, the Start/Resume LED will flash, and the cycle will not start.
Dishwasher Use STEP 1 STEP 2 Prepare and Load the Dishwasher Add Detergent IMPORTANT: Remove leftover food, bones, toothpicks, and other hard items from the dishes. Remove labels from containers before washing. Premeasured Detergents High-quality premeasured tablets and packs are recommended for improved performance. Quality tablets and packs have been proven better than powder, liquid, or gel detergents at reducing filming on dishes.
STEP 3 STEP 4 Rinse Aid Select a Cycle Efficient dishwashers run longer to save water and energy, just as driving a car slower saves gas. Cycle times may increase or decrease, depending on selections. Estimated cycle times after calibration are listed in the “Cycle and Option Descriptions” chart in the following section. Select the desired cycle by pressing the Cycles keypad. Each time you press the Cycles keypad, it will advance to the next available cycle.
Cycle and Option Descriptions Estimated cycle times may increase or decrease, depending on water temperature, soil conditions, dish load size, and options selected. You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option or select a different option. You can change an option any time before the selected option begins.
OPTION SELECTIONS OPTIONS Delay displays how many hours before the cycle will begin. To delay the start: 1. Select a wash cycle and options. 2. Press DELAY. Each time you press Delay, it will display the next available delay time. 3. Press START/RESUME to begin the delay countdown. NOTE: If the door is opened, such as to add a dish, the Start/Resume button must be pressed to resume the delay countdown.
CONTROLS AND CYCLE STATUS Control Purpose Comments To start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start/Resume LED flashes. The cycle will not resume until Start/Resume is pressed and the door is closed. NOTE: Push door firmly closed within 4 seconds of pressing Start/Resume or the dishwasher will not start. If door is not closed within 4 seconds, the Start/Resume LED will flash when the door is closed. To cancel a wash cycle.
5. Replace the track stops by coming up from under the track and slipping the lower tab of the track stop into the lower slot of the track (see Track stop – right) and rotate the track stop into place. Then press on the edge of the ridged area while pushing the track stop straight toward the track. This action locks the retaining tab back into place. 6. Test the track stop by pulling it toward the opposite track to ensure that it is locked in place. To replace the rack: 1.
Filter Reinstallation Instructions 1. Noting the previous illustrations, place the lower filter under the locating tabs in the bottom of the dishwasher, so the round opening for the upper filter assembly lines up with the round opening in the bottom of the tub. 2. Insert the upper filter assembly into the circular opening in the lower filter. Locating tab 3. Slowly rotate the filter clockwise until it drops into place. Continue to rotate until the filter is locked into place.
Troubleshooting First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual or visit producthelp.whirlpool.com. In Canada, visit www.whirlpool.ca. Contact us by mail with any questions or concerns at the address below: In the U.S.A.
PROBLEM SOLUTION WATER REMAINS IN THE TUB/WILL NOT DRAIN Be sure the cycle has completed (the Clean indicator is on). If it has not, you will need to resume the cycle by pressing Start/Resume and closing the door within 4 seconds. If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed from the disposer inlet. Check for kinks in the drain hose. Check for food obstructions in the drain or disposer. Check your house fuse or circuit breaker.
PROBLEM SOLUTION BLINKING LIGHTS Blinking indicators will occur when the cycle is paused or when the cycle has been interrupted by opening the door. If the Start/Resume light is blinking, press the START/RESUME keypad and close the door within 4 seconds. See “Start or Resume a Cycle” in the “Dishwasher Use” section. If the Clean light or any other lights are blinking and the dishwasher will not run, call for service.
WHIRLPOOL® MAJOR APPLIANCE LIMITED WARRANTY ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call the Customer eXperience Center: ■ Name, address, and telephone number ■ Model number and serial number ■ A clear, detailed description of the problem ■ Proof of purchase, including dealer or retailer name and address IF YOU NEED SERVICE: 1.
INSTRUCCIONES PARA EL USUARIO DE LA LAVAVAJILLAS LE AGRADECEMOS la compra de este producto de alta calidad. Registre su nueva lavavajillas en www.whirlpool.com. En Canadá, registre su lavavajillas en www.whirlpool.ca. Para referencia futura, tome nota los números de modelo y de serie del producto. Los puede encontrar cerca de la puerta en el lado derecho o izquierdo del interior de la lavavajillas.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA: Cuando use la lavavajillas siga precauciones básicas, incluyendo las siguientes: ■ ■ ■ ■ ■ ■ Lea todas las instrucciones antes de usar la lavavajillas. Use la lavavajillas únicamente para las funciones que fue diseñada. Use únicamente detergentes o agentes de enjuague recomendados para ser usados en las lavavajillas y manténgalos fuera del alcance de los niños.
Qué hay de nuevo en su lavavajillas Energía ¡Felicitaciones por haber comprado la lavavajillas con bajo consumo de agua y energía! Esta lavavajillas limpia rociando la vajilla con agua y hace pausas para permitir que el detergente remoje la vajilla y afloje la suciedad de los platos. Para obtener una limpieza excepcional, los ciclos se hacen más largos debido al remojo y las pausas.
Piezas y características Lavado del nivel superior Tubo de alimentación de agua El brazo de rociador inferior tiene rociadores a presión que proveen una limpieza eficaz. Etiqueta de número de modelo y de serie Abertura de la entrada de agua Elemento calentador El depósito del agente de enjuague reduce las manchas y mejora el secado. Depósito de detergente Flotador de protección de sobrellenado El sistema de lavado con recursos eficientes remueve la suciedad del agua y mejora la acción de limpieza.
Pasos rápidos 1 Elimine los restos grandes de alimentos y cargue la lavavajillas. 3 Seleccione un ciclo y las opciones. 4 Ponga la lavavajillas en marcha. 5 Descargue la lavavajillas y limpie el filtro. Bote los restos de alimento de los platos a la basura o al recipiente de desechos alimenticios. Coloque los platos de manera que el rociador de agua pueda alcanzar todas las superficies. 2 Agregue el detergente y el agente de enjuague.
Uso de la lavavajillas PASO 1 Prepare y cargue la lavavajillas IMPORTANTE: Quite de los platos los restos de alimentos, huesos, palillos y otros elementos duros. Quite las etiquetas de los recipientes antes de lavarlos. PASO 2 Agregue detergente Canasta superior ■■ Canasta inferior Verifique que no haya nada que bloquee el brazo rociador superior o inferior. Detergentes previamente medidos Se recomienda usar pastillas y paquetes previamente medidos de alta calidad para mejorar el rendimiento.
Polvos y geles Nivel de Compartimiento suciedad de prelavado* Compartimiento de lavado principal Blanda (0-4 granos por galón de EE. UU.) Ligero Ninguno Línea de llenado “Soft” Normal Ninguno Línea de llenado “Soft” Intenso Lleno Línea de llenado “Soft” Media (5-9 granos por galón de EE.UU.) Ligero Ninguno Línea de llenado “Soft” Normal Lleno Lleno** Intenso Lleno Lleno** Dura (10-14 granos por galón de EE. UU.
■■ Seleccione el ciclo de lavado y opciones que desee. Para repetir el mismo ciclo y las opciones utilizados previamente, presione la tecla START/RESUME (Inicio/Reanudar) dos veces. Dentro de los siguientes 4 segundos de presionar la tecla Start/ Resume (Inicio/Reanudar) debe empujar la puerta firmemente para cerrarla. Si la puerta no se ha cerrado en menos de 4 segundos, el LED de Start/Resume (Inicio/Reanudar) destellará, y el ciclo no comenzará. Se puede agregar un artículo al comienzo del ciclo.
SELECCIONES DE OPCIONES OPCIONES SE PUEDE SELECCIONAR CON Disponible con Delay (Retraso) muestra en la pantalla las horas restantes hasta el comienzo del ciclo. cualquier ciclo Para retrasar el inicio: 1. Seleccione un ciclo y opciones de lavado. 2. Presione DELAY (Retraso). Cada vez que presione Delay (Retraso), aparecerá el siguiente tiempo de retraso disponible. 3. Presione START/RESUME (Inicio/ Reanudar) para comenzar la cuenta regresiva del retraso.
OPCIONES SE PUEDE SELECCIONAR CON LO QUE HACE TIEMPO AGUA AGREGADO AGREGADA AL CICLO EN GALONES (LITROS) Evita el uso no intencionado de la lavavajillas entre los ciclos o el cambio de ciclos u opciones durante un ciclo. Para activado el bloqueo de los controles, mantenga presionado CONTROL LOCK (Bloqueo de control) por 3 segundos. La luz de Control Lock (Bloqueo de control) permanecerá encendida durante un tiempo corto, indicando que está activada, y todos los botones se desactivarán.
Regulador de canasta superior EZ-2-Lift™ Se puede subir o bajar la canasta superior para acomodar artículos más altos tanto en la canasta superior como en la inferior. Los reguladores se encuentran a cada lado de la canasta superior. Para levantar la canasta: Presione las dos palanquillas reguladoras de la canasta y levante la canasta hasta que quede en la posición alta y nivelada.
Sistema de filtración Su lavavajillas cuenta con lo último en tecnología de filtración para lavavajillas. Este sistema de filtración minimiza los sonidos y optimiza el ahorro de agua y energía mientras proporciona una limpieza superior. El sistema de filtros consiste de 2 piezas, un ensamblaje de filtro superior y un filtro inferior. IMPORTANTE: Para evitar dañar la lavavajillas, no la ponga en marcha sin que los filtros estén adecuadamente instalados.
Instrucciones para reinstalar los filtros 1. Consulte las ilustraciones anteriores y coloque el filtro inferior debajo de las lengüetas de ubicación en el fondo de la lavavajillas para que la abertura redonda para el ensamblaje del filtro superior esté alineada con la abertura redonda en el fondo de la cuba. 2. Inserte el ensamblaje del filtro superior dentro de la abertura circular en el filtro inferior. Lengüeta de ubicación PUS HD OW 3.
Solución de problemas Pruebe primero las soluciones sugeridas aquí. Si necesita asistencia adicional o más recomendaciones que pueden ayudarle a evitar una llamada de servicio técnico, consulte la página de la garantía de este manual o visite producthelp.whirlpool.com. En Canadá, visite www.whirlpool.ca. Contáctenos por correo con sus preguntas o dudas a la dirección que aparece a continuación: En los EE. UU.
PROBLEMA SOLUCIÓN NO SE LLENA Asegúrese de que la llave de agua a la lavavajillas esté abierta. Verifique que el flotador esté libre de obstrucciones. Consulte la sección “Piezas y características”. Verifique si hay espuma en la lavavajillas. Si se detecta espuma, es posible que la lavavajillas no funcione correctamente o que no se llene de agua. Consulte “Luces destellando” en la sección “Solución de problemas”. QUEDA AGUA EN LA CUBA/NO DESAGUA Asegúrese de que haya terminado el ciclo.
PROBLEMA SOLUCIÓN PLATOS SUCIOS/ESPUMA EN LA LAVAVAJILLAS/ CICLO INCOMPLETO Si el sistema de sensor de la lavavajillas detecta espuma, es posible que la lavavajillas no funcione correctamente o que no se llene de agua. La espuma puede ser ocasionada por lo siguiente: ■■ Uso del tipo incorrecto de detergente, como podría ser un detergente para lavar los platos a mano, detergente para ropa o jabón de tocador.
GARANTÍA LIMITADA DE LOS ELECTRODOMÉSTICOS PRINCIPALES DE WHIRLPOOL® ADJUNTE SU RECIBO AQUÍ. SE REQUIERE LA PRUEBA DE COMPRA PARA OBTENER SERVICIO BAJO LA GARANTÍA. Tenga a mano la siguiente información cuando llame al Centro para la eXperiencia del cliente: ■ Nombre, dirección y número de teléfono ■ Número de modelo y de serie ■ Una descripción clara y detallada del problema ■ Prueba de compra incluido el nombre y la dirección del distribuidor o vendedor SI NECESITA SERVICIO TÉCNICO: 1.
INSTRUCTIONS D’UTILISATION DU LAVE-VAISSELLE Nous vous REMERCIONS d’avoir acheté ce produit de haute qualité. Enregistrez votre nouveau lave-vaisselle sur www.whirlpool.com. Au Canada, visitez notre site Web www.whirlpool.ca. Pour référence ultérieure, consignez par écrit les numéros de modèle et de série de votre produit. Vous les trouverez près de la porte sur le côté droit ou gauche de l’intérieur du lave-vaisselle.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ AVERTISSEMENT : Lors de l’utilisation du lave-vaisselle, suivre les précautions élémentaires dont les suivantes : ■ ■ ■ ■ ■ ■ Lire la totalité des instructions avant d’utiliser le lave-vaisselle. N’utiliser le lave-vaisselle que pour laver la vaisselle. Utiliser uniquement les détersifs ou agents de rinçage recommandés pour lave-vaisselle et les garder hors de la portée des enfants.
Quoi de neuf dans votre lave-vaisselle Énergie Félicitations pour l’achat de votre lave-vaisselle éconergique à faible consommation d’eau! Pour nettoyer les articles, ce lave-vaisselle asperge la vaisselle d’eau, puis fait une pause pour permettre au détergent d’imprégner et de dissoudre les saletés. Les périodes de trempage et de pause prolongent la durée des programmes pour un nettoyage exceptionnel. Plusieurs modèles comportent un capteur optique d’eau.
Pièces et caractéristiques Lavage au niveau supérieur Tube d’alimentation en eau Le bras d’aspersion inférieur comporte des jets d’aspersion pressurisés pour un nettoyage efficace. Plaque signalétique des numéros de modèle et de série Ouverture du tuyau d’arrivée d’eau Élément chauffant Dispositif de protection contre le débordement Le distributeur d’agent de rinçage réduit le risque de taches et améliore le séchage.
Étapes rapides 1 Retirer les gros morceaux d’aliments et charger le lave-vaisselle. 3 Choisir un programme et des options. 4 Mettre en marche le lave-vaisselle. 5 Décharger le lavevaisselle et nettoyer le filtre. Jeter les aliments en trop dans la poubelle ou le broyeur d’aliments. Charger les articles de manière à ce que les jets d’eau atteignent toutes les surfaces. 2 Ajouter le détergent et l’agent de rinçage.
Utilisation du lave-vaisselle ■■ ÉTAPE 1 Préparation et chargement du lave-vaisselle Utiliser les fentes des couvercles et les suggestions de chargement pour séparer les couverts et obtenir un lavage optimal. IMPORTANT : Enlever de la vaisselle les restes alimentaires, os, cure-dents et autres articles durs. Enlever les étiquettes des récipients avant de les laver.
Produits sous forme de poudre ou de gel Aucun Ligne de remplissage “Soft” Normal Aucun Ligne de remplissage “Soft” Intense Remplir à sa pleine capacité Ligne de remplissage “Soft” Aucun Ligne de remplissage “Soft” Normal Remplir à sa pleine capacité Remplir à sa pleine capacité** Intense Remplir à sa pleine capacité Remplir à sa pleine capacité** Léger Remplir à sa pleine capacité Remplir à sa pleine capacité** Normal Remplir à sa pleine capacité Remplir à sa pleine capacité** Intense
ÉTAPE 4 Sélectionner un programme Les lave-vaisselle éconergiques fonctionnent plus longtemps pour économiser de l’eau et de l’énergie, tout comme une vitesse de conduite réduite permet d’économiser du carburant. La durée des programmes peut augmenter ou diminuer en fonction des sélections. Une estimation des durées des programmes après calibration est énumérée dans le tableau “Description des programmes et options” dans la section suivante.
Description des programmes et options Les durées de lavage dépendent de la température de l’eau, du degré de saleté, de la taille de la charge de vaisselle, ainsi que des options sélectionnées. On peut personnaliser chaque programme en sélectionnant une option. Voir les sélections d’options. En cas de changement d’avis, appuyer sur cette option à nouveau pour la désactiver ou sélectionner une option différente. Il est possible de changer une option en tout temps avant que l’option choisie ne commence.
SÉLECTION D’OPTIONS OPTIONS PEUT ÊTRE DESCRIPTION DURÉE SÉLECTIONNÉ SUPPLÉAVEC MENTAIRE DU PROGRAMME Delay (lavage différé) affiche le nombre d’heures restantes avant le démarrage du programme. Pour différer la mise en marche : 1. Choisir un programme de lavage et des options. 2. Appuyer sur le bouton DELAY (lavage différé). À chaque fois que l’on appuie sur DELAY (lavage différé), la prochaine durée disponible de lavage différé apparaît. 3.
OPTIONS PEUT ÊTRE DESCRIPTION DURÉE SÉLECTIONNÉ SUPPLÉAVEC MENTAIRE DU PROGRAMME GALLONS D’EAU SUPPLÉMENTAIRES (LITRES) Évite l’utilisation involontaire du lave-vaisselle entre deux programmes ou les modifications de programmes et d’options durant un programme. Pour activer le verrouillage, appuyer sur CONTROL LOCK (verrouillage des commandes) pendant 3 secondes.
Régleur du panier supérieur EZ-2-Lift™ Il est possible d’élever ou d’abaisser le panier supérieur pour charger de grands articles dans le panier supérieur ou inférieur. Des régleurs sont situés de chaque côté du panier supérieur. Pour lever le panier : Appuyer sur les deux régleurs du panier et soulever le panier jusqu’à ce qu’il soit en position haute et d’aplomb. Pour abaisser le panier : Appuyer sur les deux régleurs du panier et faire glisser le panier jusqu’à sa position basse et d’aplomb.
Système de filtration Ce lave-vaisselle est équipé de la plus récente technologie en matière de filtration. Ce système de filtration minimise le niveau sonore et optimise la consommation d’eau et d’énergie tout en offrant une performance de nettoyage supérieure. Le système de filtre comporte 2 parties, un filtre supérieur et un filtre inférieur. IMPORTANT : Afin d’éviter d’endommager le lave-vaisselle, ne pas le faire fonctionner sans que les filtres ne soient correctement installés.
Patte de positionnement PUS HD OW LO K C N & TUR N U NL OCK Réinstallation du filtre supérieur 3. Faire pivoter lentement le filtre dans le sens horaire jusqu’à ce qu’il s’insère dans l’encastrement. Continuer à faire pivoter le filtre jusqu’à ce qu’il s’emboîte. Si le filtre n’est pas complètement installé (continue de tourner librement), continuer à tourner le filtre dans le sens horaire jusqu’à ce qu’il s’insère dans le logement et s’emboîte.
Dépannage Essayez d’abord les solutions suggérées ici. Pour obtenir de l’aide ou des conseils qui permettront peut-être d’éviter une intervention de dépannage, consultez la page de garantie de ce manuel ou visitez le site producthelp.whirlpool.com. Au Canada, visitez le www.whirlpool.ca.
PROBLÈME SOLUTION PAS DE REMPLISSAGE Vérifier que le robinet d’alimentation en eau du lave-vaisselle est ouvert. Vérifier l’absence d’obstruction du flotteur. Consulter la section “Pièces et caractéristiques”. Vérifier l’absence de mousse dans le lave-vaisselle. En cas de présence de mousse, le lave-vaisselle peut ne pas fonctionner correctement ou ne pas se remplir d’eau. Consulter le point “Témoins lumineux clignotants” de la section “Dépannage”.
PROBLÈME SOLUTION VAISSELLE SALE/ ACCUMULATION DE MOUSSE DANS LE LAVE-VAISSELLE/ PROGRAMME NON TERMINÉ Si le système de détection du lave-vaisselle détecte la présence de mousse, il est possible que le lave-vaisselle ne fonctionne pas correctement ou ne se remplisse pas d’eau. La production de mousse peut avoir été causée par : ■■ L’emploi du mauvais type de détergent, comme un produit à vaisselle pour lavage manuel, un produit de lessive ou un savon pour les mains.
GARANTIE LIMITÉE DES GROS APPAREILS MÉNAGERS WHIRLPOOL® ATTACHEZ ICI VOTRE REÇU DE VENTE. UNE PREUVE D’ACHAT EST OBLIGATOIRE POUR OBTENIR L’APPLICATION DE LA GARANTIE.
W10917321A /™ ©2017 Whirlpool. Utilisé sous licence au Canada. Tous droits réservés.