Owner's Manual

22
Countertop Attachment:
Remove the brackets from the package, and insert into the open
slots on the left- and right-hand top of the dishwasher collar as
shown.
Counter top attachment
Using pliers, bend/twist tab to lock the brackets in place.
Side Attachment:
Break off the end of the bracket along the scored line using
pliers. Use sandpaper to smooth any burrs.
34. Install bracket for Side Attachment
Push bracket into slot on the side of dishwasher, and bend tab in
toward the side of the dishwasher so that it keeps the bracket in
place. Repeat this step for the other side of the dishwasher.
NOTE: Install wood shims to the inside of the cabinets if the gap
between the sides of the cabinet and the sides of the dishwasher
are greater than 1/2" (1.3 cm) on each side.
NOTE: Do not attach the dishwasher. This will be done later.
FINAL INSTALLATION CHECK
35. Open and close door
36. Align front of dishwasher with front of
cabinet doors
Align front of dishwasher door panel with front of cabinet doors.
You may need to adjust alignment to be even with your cabinets.
32. Insert bracket
Tabs must point
to the right.
32a.
33. Break end of bracket for side
attachment
Top score
line for
stainless
steel tubs
Bottom
score line
for plastic
tubs
Bend
tabs