Door Reversal Instructions

6. Switch door catch, bezel, and plug

Remove the door catch, bezel, and plug from the inside of the

inner door by squeezing and pulling/pushing them. Place the door

catch, bezel, and plug on the sides opposite from where they

were.

9. Attach door hinges

Reattach door hinges to dryer door so that the larger hole is at the

bottom of the hinge.

7. Rotate outer door

Rotate outer door 180º and set it back down on inner door.

Reattach outer door panel to inner door panel so handle is on the

side where hinges were just removed. Insert 4 door screws.

10. Remove door strike and door strike plug

Remove door strike and door strike plug from dryer cabinet. Insert

the door strike into door strike plug hole and secure with screw.

Insert door strike plug into original door strike hole and secure

with screw.

8. Flip door over

Flip door over so handle side is down.

11. Remove and transfer hinge hole plugs or

covers

Use a small, flat-blade screwdriver to gently remove 4 hinge hole

plugs or covers on left side of dryer cabinet. Transfer plugs or

covers into hinge holes on right side of dryer cabinet.