Owner's Manual

24
Remove the door assembly:
1. Lay the door on a at, covered surface with the inside of
the door facing up. Remove the 3 plugs with a plastic putty
knife. There is a cut out to stick the putty knife under to pop
out.
2. Remove the 8 screws from the dryer door and setscrews off
to the side.
3. Remove the inner door by using a plastic putty knife to
separate the sides and bottom of the dryer door and trim.
There are 2 snaps on left, right, and bottom of door. Insert
the putty knife next to the snaps.
4. When you have the door separated from the frame, use
a putty knife to lift up in the center tab and then pull door
toward you and out.