Laundry Installation Requirements

Installation Service – Dryer (Electric)
INSTALL COMPLETE -
HDFPIC – Home Delivery Free Standing Install Complete With Pedestal.
Uncrate, remove packing materials, attach legs, level, attach power cord, supply and connect approved 4" x 8' vent pipe and up to 2
elbows, plug in, test unit for proper operation, haul trash, and haul away old appliance if requested. (Must be like product).
Parts included with the Installation of a Dryer: (Parts are included only when installation is performed)
3 prong electrical cord 4 Prong electrical cord
Steam Assist Kt (if needed) Dryer Venting
Services included with the Installation of a dryer:
 The delivery provider will cover finished floors with a protective material to limit the possibility of property damage.
 The delivery provider will haul away old unit if customer request, (like product only), or move to another location. Up or down
one floor.
 The delivery provider will attach pedestal if purchased with appliance.
Obstacles that could prevent the installation:
 The delivery provider will only deliver if the person receiving the delivery is 18 years of age or older.
 Only new parts provided by the delivery provider are allowed. Existing parts or other obtained elsewhere cannot be used.
 The delivery provider will remove only exterior doors (Hinge pins) to gain access; we will not remove interior doors, hand rails,
banisters, screen doors, or move customers possessions to perform services.
 Cabinet opening must be large enough for appliance to be installed. No cabinet modification will be made.
 Old product must be free of any clothing or debris.
 The delivery provider can only connect venting to 4” rigid pipe that is within 8’ of the appliance. FMS cannot connect to plastic
or foil venting.
 The delivery provider will not connect to any existing venting.
 Electrical outlet must be securely attached to wall or floor and meet National Electrical Code requirements for dryers.
 Garage installation Code requires that the dryer must be a minimum of 18” above the parking surface.
 If installed in a closet, proper ventilation requirements must be met. Review manufacturer’s installation instructions.