Dimensions Guide

Electric Heat Pump Dryer
PRODUCT MODEL NUMBERS
Front view: Side view:
W10777574A
12/2015
WED7990F, WED9290F
27"
(686 mm)
38
3
/4" Min.
(984 mm)
39" Max.
(990 mm)
NOTE: Allow clearance behind dryer for proper
drain hose routing and cooling fan ventilation.
Push dryer back as far as possible and make sure
drain hose is not crushed or kinked.
Installation spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
Additional spacing should be considered for ease of installation
and servicing.
Additional clearances might be required for wall, door, floor,
moldings, and drain system.
Additional spacing should be considered on all sides of the dryer
to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings
in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable.
Companion appliance spacing should also be considered.
Recommended installation clearances (dryer only):
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
Back view:
* Approx. measurement.
13
1
/2"
(343 mm)
6
1
/2"
(165 mm)
6
1
/2"
(165 mm)
29
7
/8"*
(759 mm)
Water
drain
Cooling
fan
Power cord/
cable
NOTE: 0" (0 mm) spacing is allowed
behind dryer, providing drain hose is
not kinked or pinched.
51
3
/
4
" min.
(1314 mm)
31
3
/
4
" min.
(806 mm)