Specification

Gas and Electric Dryer
PRODUCT MODEL NUMBERS
W10725269A
12/2014
WED8000D, WED8500D,
WGD8000D, WGD8500D
NOTE: Most installations require a minimum
of 6" (152 mm) clearance behind dryer for
exhaust vent with elbow. See
“Venting Requirements.”
Bottom view
8
1
/2"
(218 mm)
14
3
/8"
(365 mm)
42
13
/16"
(1987 mm)
3
5
/8"
(93 mm)
1
/2"
(13 mm)
32
13
/16"
(821 mm)
56
1
/4"
(1428 mm)
11
3
/8"
(289 mm)
Door Opened
Door Closed
5
7
/8"
(150 mm)
3
1
/2"
(93 mm)
4
1
/2"
(115 mm)
3"
(77 mm)
29"
(737 mm)
14
1
/2"
(370 mm)
1
3
/8"
(35 mm)
Back view
Side view
NOTE: Leveling legs 1/2" (13 mm) (3.6 washer capacity) or
1½" (38 mm) (3.8 washer capacity) depending model.
6"/0"*
(152 mm)
14" max
(356 mm)
1"/0"*
(25 mm)
1"/1"*
(25 mm)
18"/18"*
(457 mm)
3"/3"
(76 mm)
3"/3"
(76 mm)
48"
2
/48"
2
(310 cm
2
)
24"
2/
24"
2
(155 cm
2
)
*Recommended/Minimum spacing
Spacing for recessed area or closet installation
The dimensions shown are for the recommended spacing
allowed.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, and
oor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the dryer is
recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■ Companion appliance spacing should also be considered.
Minimum Required Spacing