Use and care guide

11
4.
Select type of load to dry
First select a cycle from the “What to Dry” (Automatic cycles)
and then select the “How to Dry” to get the best combination
cycle available for the type of items you are going to dry. See
“Cycle Guide” for cycle details. Not all cycles are available on
all models.
Automatic Cycles:
You can select a different dryness level, depending on your
load. Touch DRYNESS to scroll to Less to More. Selecting
Less to More automatically adjusts the dryness level at which
the dryer will shut off. Dryness level can be changed in the rst
5-8 minutes of the cycle.
Automatic Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: Automatic Cycles will give you up to 3 temperatures to
adjust and it varies, depending on the “What to Dry” or “How
to Dry” selections that have been made.
TIMED DRY Cycle:
When you select Timed Dry, the default time appears in the
display. Touch “+” and “–” to increase or decrease the time in
1 minute increments. Touch and hold to change the time in 5
minute increments.
The default temperature may be changed by pressing
Temperature until the desired dry temperature is lit.
Steam Refresh Cycles (on some models):
Select Steam Refresh to reduce odors and light wrinkles in
dry loads consisting of wrinkle-free cotton, cotton-polyester
blends, common knits, and synthetics. If you will be unable
to remove a load immediately, touch Wrinkle Shield
to add
up to 150 minutes of periodic tumbling. You may select the +
Steam setting to add a short steam cycle after 60 minutes to
help smooth out wrinkles.
7.
Touch and hold START/PAUSE
to begin cycle
Touch and hold START/PAUSE to begin the cycle.
8. Remove garments promptly
after cycle is nished
Promptly remove garments after cycle has completed
to reduce wrinkling.
5.
Adjust cycle modiers, if desired
You may adjust different settings,
depending on what you are drying and
how your are going to dry the item. See the
“Cycle Guide” for detailed information.
NOTE: Not all options and modiers are
available with all cycles. Not all cycles
are on all models.
6.
Select any additional options
Add additional options such as Static Reduce, Wrinkle Shield,
and/or EcoBoost
(on some models) by touching that option.
If you will be unable to remove the load promptly, select
Wrinkle Shield
before pressing START/PAUSE. You may
select the “+ Steam” setting (on some models) to add a short
steam cycle after 60 minutes to help smooth out wrinkles.
NOTE: Not all options and settings are available with all
cycles.