Installation Instructions

24
4. Remove hinge and latch
Using a T25
®
screwdriver, remove the 3 screws securing the
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
Hinge
Latch
5. Reinstall hinge and latch
on opposite sides
Using a T25
®
screwdriver, reinstall the latch plate and latch
backing plate with the 3 screws removed earlier and the hinge
assembly with the 5 screws on the opposite sides from which
they were removed.
6. Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
Bottom
of door
7. Reinstall door on dryer
Using a T25
®
screwdriver, remove the 4 screws on the dryer.
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the 4 T25
®
screws removed earlier.