Installation Guide

8. Reinstall hinge and latch on

opposite sides

Using a T25

screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides

from which they were removed.

7. Remove hinge and latch

Using a T25

screwdriver, remove the three TORX

screws

securing the latch plate and latch backing plate and the

ve screws holding the hinge assembly in place.

Hinge

Latch

6. Rotate and reassemble outer window

assembly to trim ring

With the edge with two notches at the top, align the notches

on the outer window assembly with the tabs on the trim ring

and lower into place as shown in gure A.

Rotate the outer window assembly counterclockwise to lock

tabs into place (gure B). Using a Phillips screwdriver, secure

with two screws removed earlier.

IMPORTANT: Do not overtighten.

Fig. A

Fig. B

Bottom

of door

Notches