Troubleshooting guide

PAGE 2
FOR SERVICE TECHNICIAN’S USE ONLY
DO NOT REMOVE OR DESTROY
WHIRLPOOL CONTROL PANEL (features and appearances may vary between models)
Rotating the cycle selector knob turns off each
corresponding cycle indicator. (Features and
appearances vary between models).
POWER button: press once to turn off
indicator. Press twice to exit service
diagnostic mode and return to
standby mode.
START/PAUSE button: begin
or continue test. Press once
to turn off indicator.
Static Reduce button: press
once to turn off indicator.
Not available on all models.
Wrinkle Shield button: press
once to turn off indicator.
Not available on all models.
Option buttons: press each
button once to turn off
its respective indicator.
Figure 1 - User Interface Test
Timed Dry Adjust (
q
) button: press once
to turn off top segment of display.
Press each modifier button
once to turn off its respective
display segment.
Timed Dry Adjust (p)
button: press once to turn off
seven-segment display.