Owners Manual
Table Of Contents
- RANGE SAFETY
- KEY USAGE TIPS
- FEATURE GUIDE
- COOKTOP
- OVEN
- RANGE CARE
- TROUBLESHOOTING
- ASSISTANCE OR SERVICE
- SÉCURITÉ DE LA CUISINIÈRE
- CONSEILS ÉLÉMENTAIRES D’UTILISATION
- GUIDE DES CARACTÉRISTIQUES
- TABLE DE CUISSON
- FOUR
- ENTRETIEN DE LA CUISINIÈRE
- DÉPANNAGE
- ASSISTANCE OU SERVICE
- SEGURIDAD DE LA ESTUFA
- CONSEJOS FUNDAMENTALES PARA EL USO
- GUÍA DE CARACTERÍSTICAS
- SUPERFICIE DE COCCIÓN
- HORNO
- CUIDADO DE LA ESTUFA
- SOLUCIÓN DE PROBLEMAS
- ASISTENCIA O SERVICIO TÉCNICO
6
Keypad Feature Instructions
FROZEN BAKE Prepackaged
food
1. Position the food on a at rack in the oven on rack position 4. See the “Positioning
Racksand Bakeware” section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™
Technology.
2. Press FROZEN BAKE.
3. Press the number keypad to select the desired food option.
4. Press the number keypads to set the temperature as recommended on the
foodpackaging.
5. Press COOK TIME.
6. Press the number keypads to set the maximum cook time as recommended on
thefoodpackaging.
7. Press START. The range will calculate the best cook time based on the current oven
temperature.
NOTE: The cook time that appears in the display is the estimated required cook time
ascalculated by the oven control. It may be different than the time you entered. A beep
will alert you to check the food’s doneness with at least 2 minutes remaining on the timer.
Follow the prompts on the display to select more time if desired.
8. At the end of the cook time, a beep will alert you to check the food’s doneness. Follow
the prompts on the display to select more time if desired. Unless more time is selected,
the bake element turns off.
9. Press CANCEL when nished.
BROIL Broiling
1. Press BROIL.
2. Select the broiling temperature by pressing 1 - High or 2 - Low.
3. Press START, and allow the oven to preheat for 5 minutes.
4. To change the temperature, repeat steps 2 and 3.
5. Position the cookware in the oven, and then close the door.
6. Press CANCEL when nished.
CONVECT
MODES
Convection
cooking
1. Press CONVECT MODES until the desired convection mode appears in the display.
2. Press START.
3. Press the number keypads to set the desired temperature.
4. Press START.
5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when nished.
KEEP WARM Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using
thenumberkeypads. The default temperature is 170°F (75°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when nished.
DELAY START Delayed start
The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may
not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
COOK TIME Timed cooking
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
RAPID
PREHEAT
Rapid oven
preheating
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to OFF,
butitcan be changed to ON.
1. Press RAPID PREHEAT.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should
beremoved prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.
If preheating for the Bake cycle has already started, Rapid Preheat may be started directly
bypressing RAPID PREHEAT.
AQUALIFT
SELF CLEAN
Clean cycle
See the “Clean Cycle” section.