Installation Instruction

12
4. Remove cooktop burner caps and bases from package
containing parts. Place the burner bases as indicated by the
following illustration for your model:
For Models MGS8880D, WEG730H0D, and WEG760H0D:
For Models KSGG700E and KSGB900E:
For Model JGS1450D:
5. Align the gas tube opening in the burner base with the orifice
holder on the cooktop and the igniter electrode with the notch
in the burner base.
6. Place the burner caps on the appropriate burner bases.
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base.
Burner caps should be level when properly positioned. If
burner caps are not properly positioned, surface burners will
not light. The burner cap should not rock or wobble when
properly aligned.
7. Plug into a grounded 3 prong outlet.
A. Small
B. Large
C. Medium D. Medium
E. Large
A. Small
B. X-Large
C. Medium D. Medium
E. Large
A. Small
B. X-Large
C. Oval D. Medium
E. Large
A
D
C
BE
A
D
C
BE
A
D
C
BE
A. Burner cap
B. Gas tube opening
C. Burner base
D. Igniter electrode
E. Orifice holder
Small cap Medium cap Large cap X-Large cap
A. Incorrect
B. Correct
A
B
C
D
E
A
B
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING