Owner's Manual

12
3. Load laundry into washer
Load garments in loose heaps evenly around basket wall.
For best results, do not pack the load tightly. Do not wrap large
items such as sheets around the agitator; load them in loose
piles around the sides of the basket. Try mixing different-sized
items to reduce tangling.
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
4. Add liquid chlorine bleach to
dispenser (optional)
Do not overll, dilute, or use more than 1 cup (236 mL). Do not
use color-safe bleach or Oxi products in the same cycle with
liquid chlorine bleach.
5. Add fabric softener to dispenser
7. Select cycle
Turn cycle knob to choose your wash cycle. For more
information, see the “Washer Cycle Guide.”
Liquid
Chlorine Bleach
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer’s directions for correct amount
MAX FILL
of fabric softener based on your load size.
Dilute liquid fabric softener by lling the dispenser with warm
water until liquid reaches the underside of the rim. See max ll
line arrows. Do not over
ll.
Adding Liquid Fabric Softener Manually to Wash Load
During the nal rinse, wait until the washer has completed lling
and press the START/PAUSE button to pause the washer. Lift
the lid and add the measured recommended amount of liquid
fabric softener. Do not allow liquid fabric softener to spill, splash,
drip, or run into the basket or on load. Do not use more than
the recommended amount. Close the lid and press the START/
PAUSE button again to restart the washer.
6. Turn on the machine by
pressing Start/Pause button or
rotating the Cycle selection knob;
LEDs 2, 3, 4 and 5 should all light
up. LED 1 will flash and LED 6 will
remain off.