Installation Instructions

7
Install Anti-Tip Bracket
1. Remove the anti-tip bracket from where it is taped inside the
storage drawer or warming drawer.
2. Determine which mounting method to use: oor or wall.
If you have a stone or masonry oor, you can use the wall
mounting method. If you are installing the range in a mobile
home, you must secure the range to the oor.
3. Determine and mark centerline of the cutout space. The
mounting can be installed on either the left-side or right-side
of the cutout. Position mounting bracket against the wall in the
cutout so that the V-notch of the bracket is 12
9
/
16
" (31.9 cm)
from centerline as shown.
4. Drill two 1/8" (3 mm) holes that correspond to the bracket
holes of the determined mounting method. See the following
illustrations.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
Centerline
B
A
A. 12
9
/
16
" (31.9 cm)
B. Bracket V-notch
Floor Mounting
Wall Mounting
5. Using the Phillips screwdriver, mount anti-tip bracket to
the wall or oor with the two #12 x 1
5
/
8
" (4.1 cm) screws
provided.
6. Move range close enough to opening to allow for nal
electrical connections. Remove shipping base, cardboard
or hardboard from under range.
7. Move range into its nal location, making sure rear leveling
leg slides into anti-tip bracket.
8. Move range forward onto shipping base, cardboard or
hardboard to continue installing the range using the following
installation instructions.
Rear position
Front position
Diagonal (2 options)