Installation Instructions

13
10. Select options, if desired
†
From the home screen, touch the Options icon (at upper
right of screen) and the Options screen will show Soil Level,
Extra Rinses, Pre-Soak, Tumble Fresh,
™
and Wrinkle Shield
™
selections. Previously selected “What to Wash” and “How
to Wash” options will be shown on the screen. Touch the
screen for each option to change its setting.
Soil Level Option
The Soil Level option allows you to select a Light, Normal, or
Heavy soil level setting. The recommended soil level is preset
for each cycle. Some preset soil levels can be changed. For
heavily soiled and sturdy fabrics, select the Heavy soil level
setting. For lightly soiled and delicate fabrics, select the Light
soil level setting. Lower soil level settings will help reduce
tangling and wrinkling.
Extra Rinses Option
The Extra Rinses option provides one or more additional rinses
to the selected cycle. The extra rinses can be canceled at any
time by touching the “X” on the touch screen to the right of
the estimated time remaining.
Pre-Soak Option
The Pre-Soak option can be set either on or off. Pre-Soak may
be ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
Tumble Fresh
™
Option
The Tumble Fresh
™
option will periodically tumble the load
after the end of the cycle for up to 12 hours. Touch TUMBLE
FRESH to activate this option. This option is not available
when a drying mode is selected. Tumble Fresh
™
may be
ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
Wrinkle Shield
™
Option
The Wrinkle Shield
™
option is only available when a drying
mode is selected, and will periodically tumble the load after
the end of the cycle for up to 12 hours. Wrinkle Shield
™
may
be ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
† Not all options and settings are available with all programs/cycles.
See “Cycle Guides” for available options and settings.
11. Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the TOOLS button
to access the Tools screen, which contains the following
(you will need to scroll down with your nger to access
all of the selections).
Load & Go
™
Dispenser 1
Press this icon to access:
Load & Go
™
Status Dispenser 1 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Detergent Concentration Dispenser 1 and choose between:
n
2X
n
4X
n
6X
n
8X
Load & Go
™
Dispenser 2
Press this icon to access:
Load & Go
™
Status Dispenser 2 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Load & Go
™
Content Dispenser 2 and choose between:
n
Softener
n
Detergent
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
n
2X
n
4X
n
6X
n
8X
Control Lock
Press this icon to lock the controls. Swipe up to unlock.
Mute
Press this icon to mute or unmute sounds.
Utility Cycles
Press this icon to access the following utility cycles: Spin, Drain,
Rinse & Spin, and Clean Washer with affresh
®
cycle. Touch the
utility cycle you wish to use and follow the screen prompts.
Preferences
Press to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Press to access Connect to Network, SAID (Smart
Appliance ID) Codes, Mac Address, and WiFi. Follow the
screen prompts.
Info
Press to access Service & Support, Store Demo Mode,
Restore Factory, WiFi Terms and Conditions, and Software
Terms and Conditions. Follow the screen prompts.