Installation Instructions

23
NOTE: To avoid oor damage, set washer/dryer onto cardboard
before moving it.
48"
(1.2 m)
1. Move washer/dryer
IMPORTANT: It is necessary to remove all shipping
materials for proper operation and to avoid excessive noise
from washer/dryer.
Move washer/dryer to within 48" (1.2 m) of its nal location.
It must be in a fully upright position.
Loosen the four transport bolts with a 3/8" (10 mm) wrench.
Once each bolt is loose, wiggle and completely pull them out
of the washer/dryer, along with all four shipping plugs.
IMPORTANT: It is necessary to remove transport bolts
and shipping plugs for proper operation and to avoid
excessive noise from washer/dryer.
2. Remove four transport bolts
from washer/dryer
Unpacking Washer/Dryer
Transport bolt
Shipping plug