Installation Instructions

4
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
A freestanding range may be installed next to combustible walls
with zero clearance.
*NOTE: 24" (61.0 cm) minimum when bottom of wood or
metal cabinet is covered by not less than 1/4" (0.64 cm) ame
retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an uncovered wood or metal cabinet.
A
B
D
F
E
C
A. 13" (33.0 cm) maximum upper cabinet depth
B. 24" (61.0 cm) minimum opening width
C. For minimum clearance to top of cooktop, see NOTE*
D. 24
3
/
16
" (61.5 cm) minimum opening width
E. Outlet - 3" (7.6 cm) from either cabinet, 8" (20.3 cm)
maximum from oor.
F. Cabinet door or hinges should not extend into the cutout.
Product Dimensions
IMPORTANT: Range must be level after installation. Follow the
instructions in the “Level Range” section. Using the cooktop as
a reference for leveling the range is not recommended.
*Range can be raised approximately 3/4" (1.9 cm) by adjusting
the leveling legs.
**Front of door and drawer may extend further forward
depending on styling.
A
C
B
D
F
E
SURFACE
OVEN
XX
A. 28" (71.1 cm) maximum depth with handle
B. 37
7
/
8
" (96.2 cm) overall height (maximum) with leveling legs
screwed all the way in*
C. 36" (91.4 cm) cooktop height (maximum) with leveling legs
screwed all the way in*
D. 24" (60.9 cm) width
E. 25
3
/
8
" (64.4 cm) depth - back of range to front of cooktop**
F. Model/serial/rating plate is located under the storage drawer