Installation Instructions

7
INSTALLATION INSTRUCTIONS
Unpack Range
1. Remove shipping materials, tape and lm from range.
2. Remove oven racks and parts package from inside oven and
on top of range.
3. Do not remove the shipping base at this time.
Remove the storage drawer. See the “Storage Drawer”
section. Use a wrench or pliers to lower front leveling legs
one-half turn.
A
A. Shipping base
A
B
A. Wrench or pliers
B. Front leveling leg
WARNING
Excessive Weight Hazard
Use two or more people to move and install range.
Failure to do so can result in back or other injury.
Backguard Assembly
1. Lower Backguard down while guiding the Backguard slots
down between the range top and the locking nuts.
2. Use the two assembly screws to attach the back corners of
the Backguard to the side panels.
Tools Required:
Phillips Screwdriver
Parts Supplied:
(2) Assembly Screws# lOA x
1/2 Phillips Pan Hd Screw
A
B
C
B
A. Backguard slot
B. Assembly screw
C. Locking nut