Installation Guide

8
Power Supply Cord
1. Disconnect power.
2. Remove the terminal block cover screws located on the back
of the range.
Remove the top 10-31 hex nut and lugs from each of the 3
terminal blocks and set aside.
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
B
A
A. Terminal block cover
B. Phillips screws (2)
Electrical Connection - U.S.A. Only
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Add strain relief.
Style 1: Power supply cord strain relief
■ Assemble a UL Listed strain relief in the opening that is
centered beneath the conduit bracket.
■ Tighten strain relief screw against the power supply cord.
A
A. UL Listed strain relief