Installation Instruction

7
Floor Mounting
Rear position Front position Diagonal (2 options)
Wall Mounting
5. Using the Phillips screwdriver, mount anti-tip bracket to the
wall or oor with the two #12 x 1
5
⁄
8
" (4.1 cm)screws provided.
6. Move range close enough to opening to allow for nal
electrical connections. Remove shipping base, cardboard or
hardboard from under range.
7. Move range into its nal location, making sure rear leveling
leg slides into anti-tip bracket.
8. Move range forward onto shipping base, cardboard or
hardboard to continue installing the range, using the
following installation instructions.