Installation Guide
15
2. Remove the cap from the gas pressure regulator using
a at-blade screwdriver.
NOTE: Make sure sealing washer remains in the same
position.
A. Cap
3. To convert to Natural gas, unscrew the plastic adjustment
screw by hand, turn it over, and screw it in again.
A. Cap
B. Sealing washer
C. Adjustment screw
4. Reinstall the cap.
To Convert Surface Burners
1. Remove burner grate, burner caps and burners.
A. Burner cap
B. Burner
2. Locate the Natural gas orice spuds for top burners in
the bag containing literature included with the range. Two
Natural gas spuds are stamped “139,” one is stamped “175,”
and one is stamped “100.”
3. Remove the Propane gas orice spuds using a 7 mm (9/32")
combination wrench.
4. Install the Propane gas orice spuds using a 7 mm (9/32")
combination wrench.
NOTE: The range cooktop is equipped with 4 burners:
2 burners are power (front), 1 burners is standard (left rear), and
1 is simmer (right rear).
A. Standard burner - Natural gas orice spud number 140
B. Power burner - Natural gas orice spud number 175
C. Simmer burner - Natural gas orice spud number 100
D. Power burner - Natural gas orice spud number 175
5. Place Propane gas orice spuds in the parts bag for future
use and keep with the bag containing literature.
6. Reinstall burners, burner caps, and burner grates.
A
Inlet pressure
to Propane gas
Inlet pressure
to Natural gas
A
C
B
180°
A
B
A. Spud
A
A
B
C
D