Quick Start Manual

5. Place the broil burner on the broil burner orifice hood and insert

the broil burner ceramic igniter in the hole in the rear of the

oven.

6. Position the broil burner against the top of the oven and attach

it with 2 screws.

7. Replace storage drawer, warming drawer or premium storage

drawer. See the “Storage Drawer” or “Warming Drawer or

Premium Storage Drawer” section.

8. Replace the oven door. See the “Oven Door” section.

9. Replace the oven racks.

Complete Installation (LP Gas to Natural Gas)

1. Refer to the “Make Gas Connection” section for properly

connecting the range to the gas supply.

2. Refer to the “Electronic Ignition System” section for proper

burner ignition, operation, and burner flame adjustments.

IMPORTANT: You may have to adjust the “LO” setting for each

cooktop burner.

Checking for proper cooktop, bake and broil burner flame is

very important. Natural gas flames do not have yellow tips.

3. Refer to “Complete Installation” in the “Installation Instructions”

section of this manual to complete this procedure.

NOTE: Make sure to save the orifices that have just been

replaced in the conversion.

W10526974A

7/12

Printed in U.S.A.