Owner's Manual

16
3. Slowly turn the lter counterclockwise until water ows
out. Let the water ow out, without removing the lter.
When the container is full, close the drain pump lter
by turning it clockwise. Empty the container. Repeat
this procedure until all the water has drained.
4. Lay a cotton cloth beneath the drain pump lter to absorb
any water still in it. Then remove the drain pump lter by
turning it counterclockwise.
5. Remove residue from the lter by rinsing with water.
6. Reinsert the drain pump lter by turning it clockwise.
Make sure to turn it in as far as it will go, with the lter
handle left in a vertical position. To test water tightness of
the drain pump lter, pour about 1 liter of water into the
detergent dispenser. Then reinstall the base panel.
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER (cont.)