Installation Instruction

4
1"
(25 mm)
0.25"
(5 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
Custom cabinet installation:
Recessed area or closet installation:
Minimum diameter for a standpipe drain: 2" (51 mm). Minimum
carry-away capacity: 17 gal. (64 L) per minute. A 1/4" (6 mm)
diameter to 1" (25 mm) diameter Standpipe Adapter Kit is
available (Part Number 3363920). Top of standpipe must be at
least 39" (991 mm) from the oor; install no higher than
96" (2.44 m) from bottom of washer. If you have an overhead
sewer and need to pump higher than 96" (2.44 m), a sump pump
and associated hardware are needed. See “Alternate parts.”
Wall standpipe drain system
Laundry tub drain system
Minimum capacity: 20 gal. (76 L). Top of laundry tub must
be at least 39" (991 mm) from the oor; install no higher than
96" (2.44 m) from bottom of washer.
4.5"
(114 mm)
4.5"
(114 mm)
39"
(991 mm)
See requirements for oor standpipe drain system.
39"
(991 mm)
min.
4.5"
(114 mm)
The drain system can be installed using a oor drain, wall
standpipe, oor standpipe, or laundry tub. Select the method
you need.
IMPORTANT: To avoid siphoning, only 4.5" (114 mm) of drain
hose should be inside standpipe. Always secure drain hose with
cable tie.
DRAIN SYSTEM
Floor standpipe drain system
0.25"
(5 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
39" min.
(991 mm)
1"
(25 mm)
27"
(686 mm)
1"
(25 mm)
Custom under-counter installation:
39
"
(991 mm)
min.
4.5"
(114 mm)