Manual

Control Panel & Features
/
J
¢
,L°
.,_- ,_,_._ ,_._.,-°,_,_l_, _-_ _ '_ _,_, ..° _. _ . _,_ ,_,,_,,=_ ._,_,, _
....................... WRINKLE SHmELD OFF 05O 40 3oTIMEDDRY20Damp Dry TEMPERATURE CYCLE,'ir, iii'SIGNAL.............. _",_
Or, lO Cool Down L3w Off 'b' '1¢f _
OFF Dn
s[eam fefresh High
I
L
LessDry
Energy Pretepret _ 'L
Very Dry
ACCUDRY
OFF lO 20 30
,_ AiR DRY
Whirlpoo! ............._
steam SensorBrylng
,¢
//"
-_" _°'J" '" _° - 50 Dry TEMPERATURE CYCLE S_GNAL "1" "_.r,
E_. Low Of[ 'v.,
Damp Dry On r'l[{.
Le_s Dry
Med
30 lhgh
Dry ve W Dry OFF
_l I0 20 Fluff A_r
Whirlpool
i:
Not all features and options are available on all models,
Appearance may vary,
WRINKLE SHIELD TM Feature (on some models}
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD TM feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming,
[] Get 90 minutes of heat-free, periodic tumbling at the end
of a cycle. Turn the WRINKLE SHIELD TM knob to on or off
at any time before the cycle has ended,
O
CYCLE KNOB
Use your Cycle Knob to select available cycles on your
dryer, Turn the knob to select a cycle for your laundry load,
See "Cycle Guide" for detailed descriptions of cycles,
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you
may choose a setting based on the fabrics in your load.
Drying time and temperature will depend on your dryer
model.
FLUFF AIR
No heat drying,
ACCUDRY_/AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time
will vary based on fabric type, load size, and dryness
setting.
O
O
Steam Refresh (steam models only)
This cycle is best for reducing wrinkles and odors from
dry items. Cycle time will increase depending on number
of items.
TEMPERATURE
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
NOTE: The No Heat temperature setting (on some models)
is not available on ACCUDRY TM cycles.
CYCLE SIGNAL/PUSH TO START
The Cycle Signal produces an audible sound when the
drying cycle is finished, Promptly removing clothes at the
end of the cycle reduces wrinkling,
Turn the CYCLE SIGNAL knob to select the desired setting
(On or Off), Press the PUSH to START knob to start the
dryer,
NOTE: When the Wrinkle Shield TM setting is selected
and the Cycle Signal is on, the tone will sound every
5 minutes until the clothes are removed, or the Wrinkle
Shield TM setting ends.