UNDER SINK MODULAR FILTRATION SYSTEM model / modelo WHAF-0335AB model / modelo WHAF-0435AC System tested and certified by NSF International against ANSI/NSF Standard 53 for Lead, Cyst and VOC Reduction (see the claims specified on the Performance Data Sheet) and Standard 42 for Chlorine, Taste and Odor Reduction.
TABLE OF CONTENTS INTRODUCTION TO ULTRAEASE™ UNDER SINK MODULAR FILTRATION SYSTEM.......................................... 3 ASSISTANCE OR SERVICE....................................................... 3 INSTALLATION REQUIREMENTS.............................................. 3 Location Requirements............................................................. 4 Water Supply Requirements.................................................... 6 INSTALLATION INSTRUCTIONS...........................................
INTRODUCTION ULTRAEASE™ UNDER SINK MODULAR FILTRATION SYSTEM Welcome to a New Era in Home Water Filtration Systems. Thank you for purchasing the UltraEase™ Modular filtration system, Whirlpool Brand's latest innovative under sink water filtration system. This system will provide you with many years of great-tasting water. Whether from your town’s water treatment plant or decaying pipes in your home, sediment rust, sand, silt and iron can be present in your water.
Location Requirements Filtration unit layouts Note: On the easy to connect fittings the white collet represents “water in”. The blue collet represents “water out”. 1 Layout 1 Installing UltraEase™ Dual stage water filtration Unit A+B (WHAF-0335AB), requires the Whirlpool™ UltraEase™ faucet (WHAB-6012 or 6013 or 6014 or 6015) sold separately. 2 8 3 7 If faucet is not to be installed in sink spray hose opening, cut 1-3/8” (3.5 cm) dia. sink or countertop cutout. 6 3 3 1-3/4” (4.4 cm) max.
1 Layout 3 Adding the UltraEase™ DirectChill™ unit (WHAF-0115AG), requires the UltraEase™ Dual water filtration Unit A+B (WHAF-0335AB) and Whirlpool™ UltraEase™ faucet (WHAB-6012 or 6013 or 6014 or 6015) sold separately. 2 8 UltraEase™ Specialty water filtration Unit C (WHAF-0435AC) is optional in this layout (sold separately). 9 11 3 7 6 10 3 4 14.75" (37.46 cm) 5 10.30" (26.16 cm) 8.72" (22.14 cm) 1. Faucet installed in spray hose opening in sink (styles vary by model) 2.
Layout 5 If you wish to add the UltraEase™ DirectHot™ unit (WHAF-0115AF) and the UltraEase™ DirectChill™ unit (WHAF-0115AG), it will require the UltraEase™ Dual water filtration Unit A+B (WHAF-0335AB). 1 IMPORTANT: A Dual temperature faucet included with the Direct Hot unit. It does not require the faucet model WHAB-6012 or 6013 or 6014 or 6015. UltraEase™ Specialty water Filtration Unit C (WHAF-0435AC) is optional in this layout (sold separately). 2 10 12 9 11 14 3 8 6 13 7 5 4 1.
INSTALLATION INSTRUCTIONS IMPORTANT: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems that are certified for cyst reduction may be used on disinfected water that may contain filterable cysts. Tools and Parts Tools Needed Assemble the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Standard or tall neck faucet Parts Supplied Install the Filterhead Valve and Filter Cartridge A B C unit unit unit 14” 1 model WHAB-6014 model WHAB-6015 2 or model WHAB-6012 model WHAB-6013 1. Determine the cartridge installation location on the wall under the sink. The mounting template is to help you to locate the mounting bracket. Keep in mind that the center of the top holes on the mounting template must be at least 14’’ (35.6 cm) from the bottom of the under sink cabinet.
6. Grasp the base of the filter cartridge with the word “Front” facing you. FRONT 9. Push back on a downward arc until the filter cartridge stops. T FRON FRONT T FRON 7. Lay the filter cartridge into the filterhead valve cradle. 10. Place the connector tube into the blue collet “water out” on the right side of the first assembled filterhead valve. T FRON How to insert tubing in easy to connect fitting T FRON Insert the tubing squarely. See figure A. Make sure to insert tube completely.
2 Click 14. If you install filterhead valve C, repeat steps 2 to 7. If you do 1 not install filterhead valve C (WHAF-0435AC), go to “Install the faucet” section. 4. Remove hose guide and gasket from sink hole. NOTE: At this point, you could install the DirectChill™ unit (WHAF-0115AG) and/or the DirectHot™ unit with dual faucet (WHAF-0155AF) sold separately. Please refer to the Use and Care Guides for those specific products. 5. With a utility knife, cut the white tubing at 4 feet.
. Screw on the retaining nut to secure the faucet. Connect faucet to filters 1. Insert elbow fitting with blue collet into the blue collet flow monitor outlet. 6. Connect the flow monitor wire to the faucet flow monitor by inserting the connection plug into the flow monitor inlet. 7. Remove screw from cover and install 2 AA batteries in the flow monitor. Replace cover and screw. 2. Insert the white tubing into the blue collet of the elbow of the flow monitor outlet.
. Open the main water line valve. Check all connections for leaks. IMPORTANT: Before using the filtration system, follow the flushing procedure in the “Flushing Filtration System” section. FILTRATION SYSTEM ACCESSORIES FLOW MONITOR The flow monitor indicates when it’s time to change your filters. The green light indicates the filtration is good. The yellow light indicates the filtration is fair. The red light tells you it is time to change your filter.
TROUBLESHOOTING CONDITIONS ACTIONS Filterhead valve will not close. Filter may not be properly installed. Make sure the arrow with the letter inside is facing you as you slide the filter into the filterhead valve. Water does not flow out. Check that water supply has been turned on. Water leaks from tubing connection. Water leaks at filterhead valve and filter cartridge connection. Check that tubing is pushed all the way into the fitting. Make sure tubing is cut squarely.
PERFORMANCE DATA SHEETS Water Filtration System, models WHAF-0335AB, WHAF-0435AC Replacement Filter A (model WHAB-6009) Replacement Filter B (model WHAB-6010) Replacement Filter C (model WHAB-6011) The system conforms to ANSI/NSF 42 and 53 for the specific performance claims as verified and substantiated by test data. The system has been tested according to ANSI/NSF 42 and 53 for reduction of substances listed below.
PERFORMANCE DATA SHEETS Water Filtration System, models WHAF-0335AB, WHAF-0435AC Replacement Filter A (model WHAB-6009) Replacement Filter B (model WHAB-6010) Replacement Filter C (model WHAB-6011) REFERENCE DATA CONDITIONS FOR SYSTEM USE Source Water Supply Profile Application Guidelines Community/Private Chlorinated/NonChlorinated Use this drinking water system on potable water supply only.
PERFORMANCE DATA SHEETS Water Filtration System, model WHAF-0435AC Replacement Filter C (model WHAB-6011) VOLATILE ORGANIC CHEMICALS/VOC's NOTE: Volatile Organic Chemicals (VOC’s) are synthetic chemicals that readily vaporize at room temperature. CARBON FILTERS TESTED: 1m Extruded carbon, Lead/Cyst Substance Influent challenge concentration mg/L 0.050 0.100 0.081 0.190 0.078 0.077 0.015 0.110 0.052 0.080 0.040 0.088 0.083 0.170 0.086 0.080 0.079 0.170 0.053 0.088 0.044 Max.
PERFORMANCE DATA SHEETS Water Filtration System, model WHAF-0435AC Replacement Filter C (model WHAB-6011) VOLATILE ORGANIC CHEMICALS/VOC's (continued) CARBON FILTERS TESTED: 1m Extruded carbon, Lead/Cyst Substance Influent challenge concentration mg/L 1,1,2,2-tetrachloroethane Tetrachloroethylene Toluene 2,4,5-TP (silvex) Tribromoacetic acid 1,2,4-Trichlorobenzene 1,1,1-Trichloroethane 1,1,2-Trichloroethane Trichloroethelyne Trihalomethanes (includes): Chloroform (surrogate chemical) Bromoform Bromodichlo
PRESENTACIÓN DEL SISTEMA DE PURIFICACIÓN MODULAR ULTRAEASE™ PARA INSTALAR BAJO FREGADEROS Bienvenido a una nueva era en sistemas domésticos de purificación de agua. Muchas gracias por haber adquirido el sistema de purificación modular UltraEase‰, la más reciente e innovadora línea en sistemas de purificación para instalar bajo fregaderos de Whirlpool. Gracias a este sistema Ud. podrá disfrutar de una fuente inagotable de agua sabrosa durante muchos años.
REQUISITOS PARA LA INSTALACIÓN IMPORTANTE: Respete todos los códigos y las ordenanzas reguladores. Verifique el lugar dónde instalará el grifo. Asegúrese de contar con todos los elementos necesarios para efectuar una instalación correcta. El instalador debe cumplir con las especificaciones de instalación al igual que con los códigos estatales y locales que rigen una instalación sanitaria.
Diagrama 2: Si desea instalar la unidad de filtración C para el sistema de purificación especializadas UltraEase™ (WHAF-0435C que se vende por separado), necesitará la unidad A+B de filtración para el sistema de purificación en dos etapas UltraEase™ (WHAF-0335AB), y un grifo Whirlpool™ UltraEase™ (WHAB-6012, 6013, 6014 o 6015) que se venden por separado. 1 2 9 8 3 7 3 3 4 6 5 1. Grifo instalado en el orificio del rociador sobre el fregadero(los diseños varían según el modelo). 2.
Diagrama 4: Si desea agregar la unidad UltraEase™ DirectHot™ (WHAF-0115AF), necesitará la unidad A+B de filtración para el sistema de purificación en dos etapas UltraEase™ (WHAF-0335AB). 1 IMPORTANTE: La unidad DirectHot™ incluye un grifo doble especial. En este caso no será necesario que instale el grifo modelo WHAB-6012, 6013, 6014 o 6015. 2 La unidad C para el sistema de purificación especializada UltraEase™ (WHAF-0435AC) es un accesorio para este tipo de instalación (se vende por separado).
Requisitos del suministro de agua Si las normas locales lo permiten, la entrada de agua fría del sistema de purificación modular UltraEase™ debe estar conectada con la pieza de conexión en forma de T (incluida con los grifos UltraEase™, número de producto WHAB-6012, 6013, 6014 o 6015 y con la unidad DirectHot‰ WHAF-0115AF). Si va a instalar la unidad de purificación UltraEase™, la unidad DirectChill™ y/o la unidad DirectHot™* conecte primero la unidad purificadora y luego las otras dos.
Grifo estándar o de cuello alto Piezas incluidas Purificación auxiliar disponible Sistema de purificación especializada (modelo WHAF-0435AC) Piezas incluidas 3 1 1 4 o modelo WHAB-6014 modelo WHAB-6015 modelo WHAB-6012 modelo WHAB-6013 2 8 3 2 5 4 9 5 1. Cartucho que contiene el filtro para la unidad C 2. 1 válvula para la cabeza del filtro 3. Un soporte de fijación 4. 2 tornillos con cabeza de cruz (Phillips) 5. Un conectador 10 6 11 7 12 13 1. Grifo 2.
Instalación de la válvula de la cabeza del filtro y del cartucho que contiene el filtro A B C unidad unidad unidad 14” 1. Establezca en que parte del muro que se encuentra debajo del fregadero instalará el cartucho. El patrón de montaje le ayudará a ubicar el soporte de fijación. Recuerde que el centro de los orificios del patrón de montaje debe quedar a 14” (35,6 cm) de la plancha inferior del armario de cocina. Adhiera el patrón de montaje con cinta adhesiva.
8. Empuje el cartucho que contiene el filtro hacia arriba hasta que se detenga. Las 2 marcas de color (una en el soporte de la válvula de la cabeza del filtro y otra en el cartucho que contiene el filtro) deben quedar alineadas. T FRON 1 2 T FRON 9. Empuje el cartucho que contiene el filtro hacia atrás hasta que se detenga T FRON 11. Tome la válvula de la cabeza del filtro para la unidad “B” y apóyela sobre el extremo derecho del soporte de fijación.
Instalación del grifo 5. Valiéndose de una cuchilla, corte el tubo blanco a 4 pies (1,22 metros). Asegúrese de hacer un corte parejo en ángulo de 90°. Vea la sección “Requisitos para la ubicación” y “Requisitos del suministro de agua” antes de proceder a instalar el grifo. NOTA: Si el grifo de su fregadero cuenta con un rociador desmontable, y le gustaría instalar el nuevo grifo UltraEase™ en el orificio del rociador, siga los pasos de instalación a partir del punto 9. Si no, a partir del punto 14.
Conexión del grifo a los filtros 1. Introduzca el codo con collar azul en el collar azul de salida del monitor de circulación de agua. 7. Retire el tornillo de la tapa y coloque 2 pilas AA en el monitor de circulación de agua. Cierre la tapa y ajuste el tornillo. 2. Introduzca el tubo blanco en el collar azul del codo del monitor de circulación de agua.
ACCESORIOS PARA EL SISTEMA DE PURIFICACIÓN Piezas de repuesto Para averiguar la dirección del distribuidor más próximo a su domicilio a fin de adquirir un filtro de repuesto, llame al 1-866-363-9472 y solicite los números de las piezas enumerados a continuación: Cartucho con filtro de repuesto UltraEase™ - Sedimentos (Unidad A): Número de pieza WHAB-6009 Cartucho con filtro de repuesto UltraEase™ - Gusto/ Plomo/Esporas (Unidad B): Número de pieza WHAB-6010 Cartucho con filtro de repuesto UltraEase™ - Químic
ANTES DE LLAMAR AL SERVICIO TÉCNICO La vida útil del filtro es de 12 meses, teniendo en cuenta las condiciones del suministro de agua potable local y el volumen consumido. Le sugerimos que cambie los filtros cada 12 meses aproximadamente. Sin embargo, los puede cambiar antes, si nota una disminución en la presión del agua cuando fluye por el pico surtidor.
GARANTÍA DE LA UNIDAD DE PURIFICACIÓN ULTRAEASE™ Garante: Addico Products Inc.
FICHAS TÉCNICAS DE RENDIMIENTO Sistemas de purificación de agua, modelos WHAF-0335AB, WHAF-0435AC Filtro de Repuesto A (modelo WHAB-6009) Filtro de Repuesto B (modelo WHAB-6010) Filtro de Repuesto C (modelo WHAB-6011) El sistema cumple con lo establecido por las normas ANSI/NSF 42 y 53 en lo que respecta al rendimiento específico, tal como se ha verificado y confirmado por los datos obtenidos en las pruebas realizadas.
FICHAS TÉCNICAS DE RENDIMIENTO Sistemas de purificación de agua, modelos WHAF-0335AB, WHAF-0435AC Filtro de Repuesto A (modelo WHAB-6009) Filtro de Repuesto B (modelo WHAB-6010) Filtro de Repuesto C (modelo WHAB-6011) DATOS DE REFERENCIA CONDICIONES PARA EL USO DEL SISTEMA Perfil del origen del suministro de agua Pautas de aplicación Comunidad / privado Clorado /no clorado Utilice este sistema de agua potable en suministros de agua potable únicamente Presión del sistema 208 - 690 kPa (300-100 psig) T
FICHAS TÉCNICAS DE RENDIMIENTO Sistema de purificación de agua, modelo WHAF-0435AC Filtro de Repuesto C (modelo WHAB-6011) COMPUESTOS ORGÁNICOS VOLÁTILES / COV NOTA: Los compuestos orgánicos volátiles (COV) son substancias químicas sintéticas que se vaporizan fácilmente a temperatura ambiente.
FICHAS TÉCNICAS DE RENDIMIENTO Sistema de purificación de agua, modelo WHAF-0435AC Filtro de Repuesto C (modelo WHAB-6011) COMPUESTOS ORGÁNICOS VOLÁTILES / COV (continuación) FILTROS DE CARBÓN PROBADOS: 1m carbón extrudido, plomo / esporas Substancia 1,1,2,2-tetracloroetano Tetracloroetileno Tolueno Silvex o ácido 2,4,5-triclorofenoxi propiónico Ácido tribromoacético 1,2,4-triclorobenceno 1,1,1-tricloroetano 1,1,2-tricloroetano Tricloroetileno Trihalometanos (incluyen) Cloroformo (substancia sucedánea) Bro
8563999 © 2004 Whirlpool Corporation. All rights reserved. Todos los derechos reservados. ® Registered trademark/TM Trademark of Whirlpool, USA, used under license. ® Marca registrada / TM Marca de comercio de Whrilpool, USA, usadas bajo licencia. TEFLON is a registered trademark of E.I. Dupont. TEFLON es una marca registrada de E.I.Dupont.